Icom IC-F7000 service manual Specifications

SECTION 1 SPECIFICATIONS

• IC-F7000

‘ GENERAL

• Frequency coverage	: Receive		500 kHz–29.9999 MHz
				Spec (MHz)	No Spec (MHz)
				1.6–5.4999	5.5–5.7299
				5.73–5.9999	6.0–6.6999
				6.7–8.0999	8.1–9.999
		Transmit		10.0–11.1999	11.2–13.3999
				13.4–14.9999	15.0–17.9999
				18.0–18.9999	19.0–19.9999
				20.0–20.9999	21.0–22.9999
				23.0–27.9999	28.0–29.9999
• Mode	: J3E (USB/LSB), *J2B (AFSK), *F1B (FSK), *A1A (CW), A3E
		*[OTH] version only
• Antenna impedance	: 50 Ω
• Frequency stability	: ±50 Hz
• Power supply requirement	: 13.8 V (10.8 V–15.6 V) DC Negative ground
• Current drain (at 13.8 V DC)	: RX; 3.0 A at Max. audio power
		TX; 23 A at Max. output output
• Usable temperature range	: –10˚C to +60˚C; –14˚F to +140˚F
• Dimensions (projections not included)	: 240(W) ⋅		72(H) ⋅	239(D) mm; 9 7⁄16(W) ⋅	2 27⁄32(H) ⋅ 9 13⁄32(D) in.
• Weight	: Approx. 4.6 kg; 10 lb 2.26 oz

‘ TRANSMITTER

• Output power	: 1.6–29.9999 MHz	100, 50, 10 W PEP	[AUS]
	1.6–3.9999 MHz	125, 50, 10 W PEP	[OTH]
	4.0–29.9999 MHz	100, 50, 10 W PEP	[OTH]
• Spurious emissions	: Less than –43 dB at peak output power (Maximum power)
• Carrier suppression	: Less than 40 dB at peak output power (Maximum power)
• Unwanted sideband suppression	: Less than 50 dB at peak output power (Maximum power)
	with 1500 Hz AF input
• Microphone impedance	: 600 Ω

‘ RECEIVER

• Sensitivity	:
(Pre-amplifier is ON)
	MODE	FREQUENCY		20 dB SINAD		10 dB S/N
	J3E	0.5–1.5999 MHz		28 dBµV emf		14 dBµV
		1.6–29.9999 MHz		0 dBµV emf		–14 dBµV
	A3E	0.5–1.5999 MHz		46 dBµV emf		32 dBµV
• Squelch sensitivity	:
	MODE		Threshold			Tight
	J3E at 13.800 MHz		Less than +20 dBµV		Less than +90 dBµV
	A3E at 1.000 MHz		Less than +30 dBµV		Less than +110 dBµV
• Spurious response rejection	: More than 70 dB 1.6–29.9999 MHz
• AF output power	: 4 W at 4 Ω load with 10% distortion
• Clarity variable range	: ±150 Hz

All stated specifications are subject to change without notice or obligation.

1 - 1