Icom IC-V8 instruction manual Scan resume Condition

■Scan resume

condition

When a signal is received during scanning, the scan resume condi- tion determines what action the transceiver takes. The transceiver has 2 scan resume conditions avail- able as illustrated at right. Use SET MODE to select the one which best suits your needs.

SCAN OPERATION 8

USING SET MODE

Receiving a signal

Pause scan

2 sec.

Timer scan

5, 10 or 15 sec.

qPush [8•SET] after pushing [A•FUNC] to enter SET MODE. w Push [Y]/[Z] several times until “SCP” or “SCt” appears. e Rotate [VOL] to select the desired scan resume condition.

•Pause scan: When receiving a signal,

scan pauses on the signal until it disap-	F SKIP	D	TX
	AO MR
			75
pears. Resumes 2 sec. after the signal
			50 LM
disappears.			25
	Pause scan
Timer scan: When receiving a signal,	F SKIP	D	TX
scan pauses on the signal for 5 sec., 10	AO MR
			75
sec. or 15 sec., then resumes.			50 LM
			25

Timer scan

r Push [#•ENT ] to set and exit SET MODE.

34