Rose electronic RS232 specs

You may receive one of the following errors during the file transfer function: checksum error, record error, or data error. These messages are followed by:

Receive failed

Try again Y/N

These error messages may be caused by any of the following items:

Corrupted firmware upgrade file.

Loose or defective RS232 cable.

RS232 protocol not configured correctly.

Bad transmit or receive levels.

Hardware problem on transmit or receive side.

Identify and correct the transmit problem and press “Y”, then [Enter] to try again.

Press “N” and then [Enter] and the prompt "Hit enter to boot” appears. Press the [Enter] key to re-start the Xtensys switches diagnostics with the firmware unchanged.

Option 2. Send this Unit’s Main Program to other boards.

The main program updates (Option 1) updates card #1 in the unit. The firmware must be sent to all other cards using option #2.

Press 2 to send the main program to all other cards.

Cards to update - n

You are about to copy the firmware from this board to all other boards in the system.

Are you sure? Y/N

Before responding Y, make sure that the “Cards to update” number in the message above agrees with the total number of cards in the unit minus 1 (Total cards = # RJ45 CPU connectors divided by 4). When you reply Y, the following message appears:

Sending flash program code to system........................

When complete, the system returns you to the serial options menu. Wait at least 15 seconds before restarting the Xtensys after choosing option 2 for the program to propagate and program the other cards in the system.

Option 3. Reset to Factory Defaults (This CPU card only)

Selecting option 3 restores the CPU card to its original factory configuration. The following message appears:

Flash programming . . . . . . . . . . . . . . . . . . . .

When the factory defaults have been restored, the following message is displayed:

Reset to default successful

The serial options menu is then displayed, indicating that this CPU board has been reset to the factory defaults.

NOTE: Resetting the unit to factory defaults will clear ALL computer and user names and assigned passwords.

Option 4. Receive new USB program from serial port

The USB input module on Xtensys is flash upgradeable to accommodate new or changes in USB input devices. When new updates are available, download the USB update program. Updating the USB module is performed the same way as updating the new program (Option 1). Follow option 1 procedure but select the USB update program to load.

XTENSYS INSTALLATION AND OPERATIONS MANUAL

RS232 specifications

The Rose Electronics RS232 is a pivotal technology that has significantly enhanced serial communication in various applications. Renowned for its reliability and efficiency, this RS232 interface has become a crucial component in connecting peripherals to computers or other devices, especially in industrial and commercial settings.

One of the main features of the Rose Electronics RS232 is its robust design, which ensures that it can withstand the rigors of daily use in challenging environments. It is built to operate smoothly over extended distances, making it suitable for applications where devices are separated by long cable lengths. With the ability to transmit data up to 50 feet without degradation, it provides the necessary flexibility in configuration and installation.

The RS232 interface supports a variety of baud rates, allowing it to accommodate different data transmission speeds according to specific requirements. This makes it versatile for a range of devices, including printers, modems, and data acquisition systems. Additionally, the interface employs standard connector types, simplifying the integration process with existing equipment.

Another technological advantage of the Rose Electronics RS232 interface is its ability to transmit both synchronous and asynchronous data. This dual capability enhances its applicability across various industrial protocols, enhancing its usability in diverse environments. Moreover, the RS232 protocol supports full-duplex communication, which allows for simultaneous data transmission and reception, increasing overall efficiency.

In terms of compatibility, the Rose Electronics RS232 interface is designed to work flawlessly with a wide range of operating systems and software applications. This ensures that companies can seamlessly integrate legacy systems with modern devices without hassle, preserving their investment in existing technology.

The characteristics of the Rose Electronics RS232 also include electrical specifications that comply with industry standards, ensuring a reliable performance. It typically operates with a voltage range of ±3 to ±15 volts, providing the necessary power to support data transmission while minimizing the risk of voltage-related issues.

The user-friendly nature of the RS232 interface means that setup and maintenance are straightforward. This simplicity helps to reduce downtime and enhances overall productivity in any operational environment.

In summary, the Rose Electronics RS232 is characterized by its robust build, versatile baud rate options, dual communication capabilities, and compatibility with various devices. Its compliance with industry standards further ensures that it remains a reliable choice for serial communication across a multitude of applications, solidifying its position as a key technology in the field.