Toshiba 3000 manual Battery Pack Removal Optional PC Card Removal, Dvd-Rom/Cdr-W

Page 3

FIELD REPLACEABLE UNIT DOCUMENTATION

TM

Satellite

3000 Series

BATTERY PACK REMOVAL

OPTIONAL PC CARD REMOVAL

 

 

 

Battery release lever

Battery pack

PC card Eject button

1.Turn the computer upside down as shown.

2.Slide the battery release lever in the direction of the arrow.

3.Slide the battery pack forward and lift it out.

1.Push the eject button to pop it out.

2.Press the eject button and remove the PC card.

NOTE: Before removing any PCMCIA device, make sure it is “STOPPED” in the PC Card Manager.

MODULAR BAY REMOVAL

DVD-ROM/CDR-W DRIVE REMOVAL

 

DVD-ROM/CDR-W connector

DVD-ROM/CDR-W

 

Release

 

 

lever

 

DVD-ROM/CDR-W bracket

M2.5x4 black screws Select baydevice

1.Turn the computer upside down.

2.Slide the release lever in the direction of the arrow.

3.Pull out the modular bay device in the direction of the arrow.

1.Remove four M2.5x4 black screws securing the DVD-ROM/CDR-W to the bracket.

2.Slide the DVD-ROM/CDR-Wout of the bracket.

3.Disconnect the DVD-ROM/CDR-Wconnector from the drive.

TOSHIBA

Tough Enough for Today’s World

Image 3
Contents Toshiba Satellite DVD-ROM/CDR-W Battery Pack Removal Optional PC Card RemovalHDD Remove two M2.5x3 black screws securing HDD assemblyControl Board Removal JP1JP5 JP4 Remove one M2.5x3 flat head screw securing the cable cover TOP Cover RemovalRemove four M2.5x3 brass screws securing the heatsink cover CPUIPS switch cable from PJ1 Remove six M2.5x6 black screwsBlack and Gray coax cables JP8 Video Board Removal Modem Board RemovalSystem Board Removal FL Inverter and 14 LCD Removal LCDRemove two M2.5x5 silver screw securing FL inverter board