Mustang Survival MD3095, MD3090 manual Sizing and Fit

2)Unscrew and remove the CO2 gas cylinder from the inflator and inspect its small end. If it is pierced, replace it (Fig. 4)!

FIGURE 4

3)Make sure the manual lever is in the up-and-ready position and

insert the green indicator pin if not already in place. Ensure the CO2 cylinder is screwed hand tight into the inflator.

4)Undo the Velcro™ tabs on the wearer’s left-hand side of the collar to expose the oral inflator. Check that the oral-inflation dust cap is properly in the stowed position (Fig. 5).

FIGURE 5

Dust cap	Dust cap
in stowed	in deflation
position	position

5)Reposition the inflator’s protective cover and repack (P. 7). If everything checks out according to the preceding instructions, your LP is ready for use.

Sizing and Fit

The LP provides 33.7 lbs of buoyancy and is designed for wearers with a chest range of 30-52 inches weighing over 80 pounds.

3 Compact Tactical Life Preserver Owner’s Manual