Stearns Recreational 0340 manual Rearming Instructions Step

Page 11

REARMING INSTRUCTIONS

STEP 1

Unscrew used CO2 cylinder in a counterclockwise direction and immediately discard. Do not insert new cylinder at this time.

To avoid confusion later in the rearming process, we suggest you throw away the old CO2 cylinder now.

STEP 2

Close manual inflator arm within inflator body and carefully insert a new green indicator tab so that it fully covers the red semi-circleon the body.

STEP 3

Look into threaded cylinder receiver and view the gasket. If worn, contact Stearns Inc. (1-800- STEARNS) for the nearest certified Stearns Repair Facility.

11

Image 11

Contents See Page 3 for Conditions for Type V Approval Adult Universal for Persons Over 80 PoundsInflation System SpecificationsUSE Replacement KIT no II. Conditions for Type V Approval Approved only When WornInspecting Your PFD for Damage Mandatory Carriage RequirementsIII. Instructions for USE PRE-DONNING InstructionsAdditional Notes on CO2 Cylinders Examine the inflation mechanism status indicatorsExamine Your CO2 Cylinder Cylinder TightnessOther USE Guide Lines Donning and Inflation Instructions Donning Instructions Maximizing Performance Deflation Instructions Rearming Instructions Step Rearming Instructions Step Repacking Instructions Users Inspection IV. is Yourpfd in Goodand Serviceable CONDITION?Rearming Kits Care and Cleaning InstructionsServicing VI. WHY are PFDs Required Safety EQUIPMENT?Storage RepairYour fully armed PFD, VII. HOW and WHY to Test Your PFD?HOW do YOU Test Your PFD Using the Manual INFLATOR? HOW do YOU Test Your PFD Using the Oral INFLATOR? IX. Hypothermia VIII. Wear Your PFDSome Points to Remember About Hypothermia Protection XI. Additional Information Buddy Line Information Order to Receive Important Updates On this PFDDo not Attach PFDs to Your Boat CO2 Permeation Loss