Stearns Recreational 0340 manual Deflation Instructions

Page 10

DEFLATION INSTRUCTIONS

Deflating may be accomplished by inserting the deflation tool located on the dust cap into the end of the oral inflation tube while gently squeezing the inflation chamber. Reposition the dust cap over the end of the inflation tube after deflating to help protect the valve inside.

DO NOT TWIST OR WRING INFLATABLE CHAMBER TO DEFLATE.

If for any reason the oral valve remains open, depress it several times. If it does not release, discontinue use of this PFD and return to Stearns Inc for repair. In an emergency situation, hold thumb over the valve if it will not close.

10

Image 10

Contents Adult Universal for Persons Over 80 Pounds See Page 3 for Conditions for Type V ApprovalUSE Replacement KIT no SpecificationsInflation System Approved only When Worn II. Conditions for Type V ApprovalPRE-DONNING Instructions Mandatory Carriage RequirementsIII. Instructions for USE Inspecting Your PFD for DamageCylinder Tightness Examine the inflation mechanism status indicatorsExamine Your CO2 Cylinder Additional Notes on CO2 CylindersOther USE Guide Lines Donning and Inflation Instructions Donning Instructions Maximizing Performance Deflation Instructions Rearming Instructions Step Rearming Instructions Step Repacking Instructions IV. is Yourpfd in Goodand Serviceable CONDITION? Users InspectionCare and Cleaning Instructions Rearming KitsRepair VI. WHY are PFDs Required Safety EQUIPMENT?Storage ServicingHOW do YOU Test Your PFD Using the Manual INFLATOR? VII. HOW and WHY to Test Your PFD?Your fully armed PFD, HOW do YOU Test Your PFD Using the Oral INFLATOR? VIII. Wear Your PFD IX. HypothermiaSome Points to Remember About Hypothermia Protection XI. Additional Information CO2 Permeation Loss Order to Receive Important Updates On this PFDDo not Attach PFDs to Your Boat Buddy Line Information