mark is on the desired range. Press the CLR key to exit the menu.
RESET DISTANCE LOG
The X-70A 3D can display the log (distance travelled) in the digital block if the optional speed/temperature sensor is installed. This feature starts counting distance as soon as the unit is turned on. To reset the distance log to zero, press the MENU key three times, then press the key adjacent to the “Reset Distance Log” label. Press the CLR key to return to the sonar display.
MENU - PAGE 4
3D ENHANCE
Although the X-70A 3D has four transducer elements, the display shows an enhanced grid that adds points to the grid. See the difference be- tween the two screens shown below. To remove the extra lines and view only the depth grid from the four elements, first press the MENU key four times. Now press the key next
to the “3D Enhance” label. The extra lines are erased from the display. To turn the enhanced display on, simply repeat the above steps.
3D SCREEN ENHANCED | 3D SCREEN NOT ENHANCED |
