Eagle Electronics 320, 320DF Overlay Data, To select data for display, To turn off displayed data

Overlay Data

To change the digital data shown on top of the Sonar Page or the Map Page:

First, press PAGES, use → or ← to select a Page Name, then press EXIT.

To select data for display:

1.From the Map or Sonar page, press MENU↓ to OVERLAY DATAENT.

2.Press ↓ or ↑ to select Data TypeENT.

Overlay Data command on the Sonar Menu, at left. Overlay Data Shown selection menu, right. In this example, we scrolled down the data list to highlight "Ground Speed."

When selected, the data type shifts to the top of the data list and a check mark appears beside the data type. (If you wish, you may now use ↓ or ↑ to select other Data Types for display.)

Data list showing "Ground Speed" selected to display on Sonar Page.

3. To return to the previous page, press EXITEXIT.

To turn off displayed data:

1. From the Map or Sonar page, press MENU↓ to OVERLAY DATAENT.

70