Eagle Electronics 500C manual Noise Rejection, Overlay Data, To record or log chart data

At left, the Sonar Page menu with the Log Sonar Chart Data command selected. At right, Sonar Chart Logging menu, with the Start Logging command selected. The menu says the MMC has 34.2 MB of free space, which will record the scrolling chart for 44 minutes and 59 seconds.

To record or log chart data:

1.Press MENU↓ to LOG SONAR CHART DATAENT.

2.To record data using the default settings, press ENT. The menu clears

and the Sonar Page title bar shows the name of the file you are record- ing. Warning messages will appear as recording time begins to run out.

NOTE:

You can change any of the settings by using the cursor arrows to highlight different commands. Select FILE NAME if you want to change the name. Select CHART QUALITY if you want to lower the file quality and record for a longer period of time. After you've changed the settings, select START LOGGING and press ENT.

Noise Rejection

See the entry on Advanced Signal Processing in this section.

Overlay Data

On any Page display except Satellite Status, you can "float" or overlay additional GPS or navigation data on the screen with the Overlay Data command. For example, if you left your watch at home, you could dis- play the local time on top of the map. Or, if you wanted to see details about your route and trip, you could show your bearing, course, average speed and trip distance.

68