Insignia manual Using the 350TX

Page 24

USING THE 350TX

MENU FUNCTIONS

Increasing the value to a number greater than zero shows more fish symbols on-screen. In this case smaller sonar returns will be depicted as fish symbols. This is useful for identifying many smaller sonar returns (such as baitfish) as fish symbols.

Decreasing the value to a number less than zero shows fewer fish symbols on-screen. In this case smaller sonar returns are disregarded. This is useful for eliminating many small sonar returns when seeking larger species of fish.

The 350TX remembers this selection even when the unit is powered off.

Numeral Size. Two options are available: BIG and SMALL. The factory setting is BIG. With this setting, the digital depth and speed and temp numerals are drawn large enough to be read from across the boat. The big numerals occupy space on the display that

could be used for the graphics area. Hence,

the small numerals option. With small numerals selected, a greater amount of the display area is available for the graphic

view. This effectively increases the display resolution of the unit.

Numeral Size settings are remembered when powered off.

Transducer. The Transducer Option controls the 350TX’s ability to determine the transducer connected. If you are using the standard tri-beam transducer or wide side transducer, no adjustment to this menu is needed unless the transducer develops a fault, which is a rare occurrence. The factory setting for the Transducer menu is AUTO. The transducer menu selections will be remembered when the 350TX is turned off.

If a faulty transducer is connected, the 350TX may not change the screen presentation to match the transducer. In this instance, you may need to manually select TRI-BEAM for the tri-beam transducer or SIDE for the WideSide transducer.

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents
Page Page Table of Contents Installation Preparation AccessoriesInstallation Overview Parts SuppliedInstallation Overview Determining How to Mount the TransducerAlternate Transducers and Mounting Methods Alternate Transducers and Mounting MethodsPortable Mounting Trolling Motor MountingBeginning Installation Transducer ExchangeTransducer Exchange Using the 350TX HOW Sonar WorksHOW Sonar Works Feature Memory Simulator OperationSimulator Operation What YOU see ON-SCREEN What You See On-ScreenAppears in regular variations that Match wave timing What YOU see on Screen Control Functions Control FunctionsUsing the 350TX Range of Adjustment Indicator Menu Functions Menu FunctionsUsing the 350TX Depth Range Upper Zoom Limit Zoom keeps the bottom in view even in quickly Using the 350TX Using the 350TX Using the 350TX OFF, sonar returns are displayed as raw Using the 350TX Using the 350TX Advanced Features Using DiagnosticUsing the Diagnostic Feature Using the Diagnostic FeatureUsing Alternative Transducers Using Alternative TransducersWide side operation Maintenance Maintenance and Troubleshooting MaintenanceTroubleshooting Troubleshooting Nothing happens when I turn the unit onThere is no transducer detected There is no bottom reading visible on the displayUnit comes on before I press POWER, and won’t turn off My unit loses power at high speedsGet gaps in the reading at high speeds Screen begins to fade out. Images are not as sharp as normal Customer SupportSpecifications TOP
Top Page Image Contents