3 | Press the ▲ or ▼ button to select signal source, then | |
press the ENTER button. | ||
| ||
|
| |
4 | Press the MENU button to exit. |
•When you connect equipment to the TV, you can choose between the following sets of jacks:
AV,
•HDMI input can only be selected when the external device is turned on.
T V | Source List |
|
| |
| TV |
|
|
|
| AV | : |
|
|
| : |
|
| |
| Component 1 | : |
|
|
| Component 2 | : |
|
|
| PC | : |
|
|
| HDMI | : |
|
|
| Move | Enter | Return | |
|
|
|
|
|
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center.
Problem | Possible Solution |
Poor picture. | Check all wire connections. |
No picture or sound. | Try another channel. Press the SOURCE button. |
| Make sure the TV is plugged in. |
| Check the antenna connections. |
Poor sound quality. | Try another channel. |
| Adjust the volume. |
Your remote control does not | Press the “MODE” button to put your remote control in |
operate the TV. | the “TV” mode. |
The TV won’t turn on. | Check if the power plug is connected. |
There is no screen image. | Check to see that both the TV and the source are |
| plugged in and turned on. |
The image is too light or too | Adjust the Brightness or Contrast settings. |
dark. |
|
The image is too large or too | Adjust the Size settings. |
small. |
|
Digital broadcasting screen | Please check the digital signal strength and input |
problem. | antenna. |
Screen is black and power | On your computer check; Power, Signal Cable. |
indicator light blinks steadily. | The TV is using its power management system. |
| Move the computer’s mouse or press any key on the |
| keyboard. |
| On your equipment check (STB, DVD, etc) ; Power, |
| Signal Cable. |
| The TV is using its power management system. |
| Press the Source button on the panel or remote control. |
| Turn the TV off and on. |
|
|