Connecting CableCARD
You must obtain a CableCARD from a local cable service provider.
TV
| Power cord |
| From cable TV |
| Please insert the card as shown. |
1 | Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted” |
is displayed on the screen. If the channel information does not exist, the message “Updating | |
| Channel List” is displayed during channel information configuration. It could take several |
| minutes to update the channel information depending on your cable service provider. |
2 | The pairing information containing a telephone number, CableCARD ID, Host ID, and other |
information will be displayed in about 2~3 minutes. If an error message is displayed, please | |
| contact your service provider. |
3 | When the channel information configuration has finished, the message “Updating Completed” |
is displayed, indicating that the channel list is now updated. | |
4 | The Channel list can now be displayed by pressing CH LIST button. |
•Once the channel list has been updated, only the channels on the channel list can be selected.
•Remove the CableCARD by carefully pulling it out with your hands since dropping the CableCARD may cause damage to it.