Cobra Electronics MF 2500 How can I set optimal operating parameters, What are preset modes?

Page 18

Frequently Asked Questions

Reconnect the cables to the PCB.

Push the panel towards the case (be sure to have well positioned the rubber gasket). Close the MF 2500 Fish Finder box screwing the four screws.

4.2How can I set optimal operating parameters.

Optimal operating parameters can be set accordingly with the intended use of the Fish Finder. To quickly set get optimal operational parameters for fishing it is possible to select the FISH preset from the Fish Finder Setup menu, while for cruising it is possible to select the CRUISE preset.

4.3What are preset modes?

Preset modes are pre-defined settings of the Fish Finder operating parameters. There are five preset. You can use them to quickly set the Fish Finder in the most commonly used operating modes. These are:

CRUISE: sets the Fish Finder in full auto mode with the sensitivity settings (GAIN OFFSET, NOISE level and STC) optimized for displaying at best the bottom.

FISH: sets the Fish Finder in full auto mode with the sensitivity setting optimized for target searching.

AUTORANGE: sets the autorange mode and the manual gain mode.

BOTTOM LOCK: sets the range mode to bottom lock and the manual gain mode.

MANUAL: sets the range mode and the gain mode to manual.

Nothing Comes Close to a Cobra® 17

Image 18
Contents Page MF 2500 Fish Finder Customer Assistance Operators English and Spanish Our Thanks to You Customer AssistanceCustomer Assistance Information Technical Assistance For Assistance Outside the U.S.APage What is in the BOX? Included in This PackageTable of Contents Table of ContentsManual Organization Overview OverviewTechnical Specifications Technical SpecificationsMF 2500 Fish Finder Dimensions Dimensions Mounting the Fish FinderMounting the Fish Finder InstallationInstalling Optional Devices Status LEDStatus LED Standalone DSTExternal Connections External ConnectionsPower Supply Wiring Diagram Power Supply Wiring DiagramChartplotter Connection Diagram Chartplotter Connection DiagramTransducers TransducersTransducers Frequently Asked Questions Frequently Asked QuestionsWhat are preset modes? How can I set optimal operating parametersWhat should I do if the auto modes fail? Auto-range fails in very shallow waters displaying a digitalFrequently Asked Questions How can I reduce the surface clutter? Representation. What should I do?Index Index