Dual MXD25 owner manual Tuner Operation, Preset Scan

MXD25 OPERATION

Seek Tuning

Manual Tuning

FM Stereo/Mono

Band

Frequency Spacing

Storing and Recalling Station Presets

Automatically Store Stations

Preset Scan

Tuner Operation

Press TUNE nnor TUNE llmomentarily to seek the next strong station.

Press TUNE nnor TUNE llfor more than 2 seconds, then release. “MANU” will momentarily appear in the display. Press TUNE nnor TUNE llmomentarily to move radio frequency up or down one step at a time. Press and hold to advance quickly. If tuning is not adjusted for 5 seconds, the unit will return to seek tuning mode (default). “AUTO” will momentarily appear in the display.

Press ST/MO for more than 2 seconds during FM tuner operation to select mono or stereo (default) reception of the broadcast signal.

Press BAND to select between FM1, FM2, FM3 and AM1, AM2 bands.

Press and hold BAND then press TUNE nnto select European frequency spacing. Press and hold BAND then press TUNE llto select USA frequency spacing (default). Anytime frequency spacing is changed, all station presets are erased.

Up to 18 FM stations and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button for more than 2 seconds. When stored, the preset number will appear in the display. The station can be recalled anytime by pressing the corresponding preset button.

Press AS/PS for more than 2 seconds to automatically store the six strongest stations in the current band.

Press AS/PS momentarily to scan presets 1-6 on the current band, pausing for 5 seconds at each. Press AS/PS again to cancel.

7