Dual MXD25 USB Charging Port Select Audio Bass Treble Balance Fader, Press Audio until F appears

Page 6

MXD25 OPERATION

General Operation

USB Charging Port

Select Audio

Bass

Treble

Balance

Fader

Insert the USB connector of a battery powered USB device into the USB charging port on the front panel, which provides 5 volts DC and 1.0 amps. The USB device will immediately begin charging.

Note: The USB charging port may not be compatible with every device due to differences in power requirements.

Note: This USB port provides power only, and will not playback music from a USB device.

Press AUDIO to select between Volume (default), Bass, Treble, Balance & Fader.

VOLUME BASSTREBLEBALANCE FADER

Press AUDIO until BA appears

Rotate the rotary encoder left/right to adjust (-6 minimum / 6 maximum)

Press AUDIO until TR appears

Rotate the rotary encoder left/right to adjust (-6 minimum / 6 maximum)

Press AUDIO until B appears

Rotate the rotary encoder left/right to adjust (BL 15/BR 15) B 00 represents equal balance.

Press AUDIO until F appears

Rotate the rotary encoder left/right to adjust (FF 15/FR 15) F 00 represents equal balance.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents MXD25 Before You Start Please read entire manual before installationPreparation Getting StartedWiring Diagram Blue Black REDControl Locations AS/PSGeneral Operation Faceplate RemovalUSB Charging Port Select Audio Bass Treble Balance Fader Press Audio until F appearsPreset Scan Tuner OperationCD Player Operation CompatibilityTroubleshooting Problem Cause ActionError Code Cause Action Limited One Year Warranty What to do?Call us toll-free at Mail us at cs@dualav.com MXD25 Notes Reference 14.4VDC +/- 0.2V, 20Hz~20kHz Dual Electronics Corp Toll Free
Top Page Image Contents