Furuno 16 Other Functions, Aborting an Operation, Press the 3 key to choose Abort, Abort screen

6.OTHER FUNCTIONS

This chapter describes how to abort operation, scan NCS, choose EGC and NCS channels and display LES information.

6.1Aborting an Operation

You can abort transmission, receiving or scanning (on the NCS common channel) as follows:

1. Press the [F7] key to display the Options menu.

Options

1.Login

2.Logout

3.Abort

4.Select NCS

5.Ocean Region

6.LES Information

7.Test

Options menu (when FELCOM 16 functions as Inmarsat MES)

2. Press the [3] key to choose Abort.

Options

Abort

Start

Yes No

Abort screen

3.Yes is selected; press the [Enter] key to abort current operation.

The message “FORCED CLEARING” replaces “SENDING” or “RECEIVING” at the bottom of the screen. When the process has been aborted, the message “Process Aborted. Press any key to escape.” appears.

Note: If aborting is attempted in modes other than those mentioned above, the message “Ignored: Can not abort current process.” appears.

6-1