Furuno 16 manual Adding NCS Channels, NCS channel list, update window, 044

2. SYSTEM INITIALIZATION

2.5Adding NCS Channels

This section shows you how to add NCS channels to the NCS Channel List. 19 channels can be listed per each ocean region. Currently, there are four NCS channels, and they are marked with asterisks in the list. Add NCS channels to the list as below when they become operational.

1.Press the [F8] key to display the Setup menu.

2.Press the [8] key to display the Configuration menu.

3.Press the [4] key to display the NCS Channel List.

Setup

Configuration

				NCS Channel List
							ENTER: Set		ESC: Quit
No	AOR (WEST)		AOR (EAST)			POR			IOR
	ID	FREQ	ID	FREQ	ID		FREQ	ID	FREQ
1	044	11080*	144	12580*	244	12580*		344	10840*
2	0		1		2			3
3	0		1		2			3
4	0		1		2			3
5	0		1		2			3
6	0		1		2			3
7	0		1		2			3
8	0		1		2			3

NCS channel list

4.Use the arrow keys to place the cursor in a blank ID column.

5.Press the [Enter] key to open the data entry window.

6.Enter NCS channel ID number, in two digits. (Entry of leading zero is not necessary.) The ID number range is 45-63.

7.Press the [Enter] key to close the window.

8.With the [→] key, choose the frequency column.

9.Press the [Enter] key to open the frequency entry window.

10.Enter NCS channel frequency code. The frequency code range is 6000-14000.

11.Press the [Enter] key to close the window.

12.Press the [Esc] key to open the update window.

Setup

Configuration

NCS Channel List

ENTER: Set ESC: Quit

No	AOR (WEST)		AOR (EAST)			POR
	ID	FREQ	ID	FREQ	ID	FREQ
1	044	11080*	144	12580*	244	12580*
2	0		1		2
3	0		1		2
4	0		1		2
5	0		1		2
6	0		1		2
7	0		1		2
8	0		1		2

IOR

ID FREQ

34410840*

3Update

Yes No

3

NCS channel list, update window

2-17