Furuno 16 Setting the receive alarm, Displaying, printing received messages, 4-24, Auto Log Print

4. INMARSAT C OPERATIONS

4.2.2Setting the receive alarm

An audio alarm may be set to sound when a routine or confidential message is received. The factory setting is OFF. Set alarm volume at the PC.

1.Press the [F8] key to display the Setup menu.

2.Press the [5] key to display the Auto Mode Setup menu.

	Auto Mode Setup
Auto Log Print		OFF
Receive Alarm		OFF
Auto Receive Message Save		OFF
Auto Receive Message Print		OFF
Data Report & Polling Print		OFF
Auto EGC Message Save
Auto EGC Message Print

Auto mode setup menu

3.Press the [↓] key to choose Receive Alarm.

4.Press the [Enter] key to open the Receive Alarm options window.

5.To enable the audio alarm, choose ON. As soon as ON is selected a beep sounds. The alarm will be released when a telex or e-mail is received.

6.Press the [Enter] key to close the window.

7.Press the [Esc] key twice.

4.2.3Displaying, printing received messages

Received messages (except confidential or password affixed) are automatically printed when the Auto Receive Message Print in the Auto Mode Setup is turned on. To print confidential or password affixed messages follow the procedure below.

If you cannot read an e-mail attachment (because it is MIME-coded), go to paragraph 3.10.

1.Press the [F6] key to show the Logs menu.

Logs

1.Send Message Log

2.Receive Message Log

3.EGC Log

4.Log

Logs menu

4-24