Furuno 16 manual Position, speed, course, Charge, With cursor and press the Enter key

5. DATA REPORTING AND POLLING

“Daily” is selected at step 19

(1)Press the [↓] to choose Start Time 1.

(2)Press the [Enter] key to open the start time entry window.

(3)Key in the start time.

(4)Press the [Enter] key to close the window.

(5)If necessary, key in the start time of Start Times 2-4.

22.Press the [↓] key to choose Report Contents.

23.Press the [Enter] key to open the report contents options window.

24.Press the [↓] or [↑] key to choose the contents of message report and press the [Enter] key to close the window.

NAV:	Position, speed, course
NAV(R):	Position, speed, course. The difference between this and “NAV”
	above is that blank areas in data are shortened to lessen toll
	charge.
FILE:	Choose a file. (When chosen “FILE” is activated. Choose file
	with cursor and press the [Enter] key.)

25.Press the [Esc] key to show the update window.

Message Report

PIN Code

Message Report Programming

Status	ON
Station Name	FRNINMBTSTSES
Destination Type	TELEX
Prefix Code
Country/Ocean Code	583
Station ID	343199710
Modem Type
Subject
LES ID	303 (KDDI)
Activation	Daily
Interval Time	01:00
Report Times	24 (- - - : No Limit)
Start Time1	08:00
Start Time2
Start Time3
Start Time4
Report Contents	NAV
File

Update

Yes No

Message report screen

26.Yes is selected; press the [Enter] key.

27.Press the [Esc] key twice to return to the standby display.

5-6