Furuno 16 manual EGC setup menu, station code entry window, EGC setup menu, update window

2.SYSTEM INITIALIZATION

10.Press the [↓] key to choose Station Code.

11.Press the [Enter] key to open the station code entry window.

		Setup			EGC Setup
Receive EGC Area
	Additional Position					:	:
		Navarea
	Fixed Area
	Waypoint (from NAV Equipment)					OFF
NAVTEX
	Station Code
	Type of Message		(Can't reject other report)
	Ice reports			OFF		OMEGA messages		OFF
	Meteo. forecasts			OFF		SATNAV messages		OFF
	Pilot service			OFF		Other navaid msg		OFF
	DECCA messages			OFF		QRU (no message)		OFF
	LORAN messages			OFF

EGC setup menu, station code entry window

12.Enter the navtex station code (A-Z) of the navarea, in upper case alphabet. For details about navtex stations, consult the operator’s manual of the navtex receiver.

13.Press the [Enter] key to close the station code entry window.

14.Choose message type to receive:

a)Press the [↓] or [↑] key to choose message type.

b)Press the [Enter] key.

c)Press the [↓] or [↑] key to choose ON or OFF as appropriate.

d)Repeat a) thru c) to set other message types.

e)Press the [Enter] key.

Note: Navtex messages “Coastal navigational information”, “Meteorological warning” and “Search and rescue alert” (they do not appear on the EGC Setup menu) must always be received.

15.Press the [Esc] key to open the update window.

	Setup		EGC Setup
Receive EGC Area
Additional Position				:	:
	Navarea
Fixed Area
Waypoint (from NAV Equipment)				OFF
NAVTEX
Station Code
Type of Message (Can't reject other report)
Ice reports		OFF		OMEGA messages			OFF
Meteo. forecasts		OFF
				SATNAV messages			UpdateOFF
Pilot service		OFF		Other navaid msg			OFF
DECCA messages		OFF		QRU (no message)		YesOFF No
LORAN messages		OFF

EGC setup menu, update window

16.Yes is selected; press the [Enter] key to update EGC settings.

17.Press the [Esc] key to return to the standby display.

2-12