Furuno 16 manual Editor menu setup, Text Mode

3. FILE OPERATIONS

3.2.3Editor menu setup

The Editor menu sets the parameters of the text editor.

1.Press the [F8] key to display the Setup menu.

2.Press the [2] key to display the Editor Setup menu.

File Edit Transmit EGC					Reports Logs Options	Setup	Position StopAlarm
			Setup
		Editor Setup
	Text Mode			Ascii
	Edit Mode			Insert
	Word Wrap			ON
	Line No.			ON
	Tab Width			4 Char
	Column Width			69
	Cursor Type			Block
	Scroll			Full Screen

Editor setup menu

3.The illustration above shows the default editor setup settings. To change settings:

a)Press the [↓] or [↑] key to choose item.

b)Press the [Enter] key to open corresponding options window.

c)Press the [↓] or [↑] key to choose setting.

d)Press the [Enter] key to register setting.

e)Press the [Esc] key twice to return to the standby display.

Text Mode: Choose “Telex” when creating a telex message. Only upper case alphabet is permitted in telex. Use “ASCII” when creating an e-mail message. Upper and lower case alphabet may be used in an e-mail.

Edit Mode: Choose “Insert” (insert character at cursor location) or “Overwrite” (write over character at cursor location).

Word Wrap: Turns on/off automatic hyphenation at the end of a line.

Line No.: Turns line number display on or off.

Tab Width: Sets horizontal tab width; two, four or eight tabs per line.

Column Width: Choose “69” for Telex or “40 to 80” for ASCII.

Cursor Type: Chooses cursor configuration, “■“ or underline.

Scroll:Sets how much the screen moves up over the page (Full Screen or Half Screen) when [PgUp] or [PgDn] key is operated.

3-4