Furuno 16 manual System Status Monitor

7. MAINTENANCE, TROUBLESHOOTING

7.4System Status Monitor

The system status monitor, which is always displayed, provides date, time, equipment status and navigation data.

		File Edit Transmit	EGC	Reports Logs		Options Setup	Position StopAlarm
							IMN: 443156710
		Date	02-02-25			BBER	000
		Time	01:32 (UTC)			C/N	OK (	0 dB)
						Send Level	OK (	0)
		Position	LAT 34:30.00N			Rx AGC Level	OK (254)
			LON 135:00.00E			REF Offset Freq	OK (	0 Hz)
		Waypoint	LAT			Synthe Local	OK
			LON			VCXO Control	131
		Course	345.5 DEG
		Speed	10.2 KTS
		Current NCS	344 (IOR)	LOGOUT		Antenna Power Supply OK
		Current Channel	NCS CC
		Current TDM	NCS CC			Water Temperature	DEG
		MES Status	Idle			Water Current
		GPS Status	2D			Direction	DEG
						Speed	KTS
		DCE Memory	32818 Bytes free			Depth
		Current State: IDLE			Retuning	02-02-25 01:32 (UTC)
					NCS: IOR	LOGOUT	LAT: 34:30.00N
		DCE F16 Ver. ##					LON: 135:00.00E
	## = Version no. of RF CON Board
			System status monitor display
Interpreting the system status monitor
Date:			Current date
Time:			Current time
Position:			Own ship’s L/L position (either manual entry or
Waypoint:			automatic input by navigator)
			Blank
Course:			Course
Speed:			Ship’s speed
Current NCS:			NCS your vessel is logged in with
Current Channel:			Channel in use
Current TDM:			Channel TDM
MES Status:			Operational status of MES
GPS Status:			Receiving signal status from GPS receiver.
			CST:		Cold Start
			ACK:		Acquired; Almanac data acquired
			IMP:		Impossible; cannot receive GPS signal
			INT:		Interrupted; object interfering with reception
					of GPS signal
			ALM:		Receiving the almanac
			2D, 3D: Position-fixing method by 2D or 3D

7-7