Furuno 16 manual Standby Display, Standby display

1. OPERATIONAL OVERVIEW

1.3Standby Display

After the equipment is turned on and the diagnostic test has been conducted, the standby display appears, showing the system status monitor. The system status monitor provides various operating information. For a detailed description, see paragraph 7.4.

File Edit Transmit	EGC	Reports Logs	Options Setup	Position StopAlarm
				IMN:	443156710
Date	02-02-25		BBER		000
Time	01:32 (UTC)		C/N		OK ( 0dB)
			Send Level		OK (	0)
Position	LAT 34:30.00N		Rx AGC Level		OK (135)
	LON 135:00.00E		REF Offset Freq		OK (	0Hz)
Waypoint	LAT		Synthe Local		OK
	LON		VCXO Control		131
Course	345 DEG
Speed	10.2 KTS
Current NCS	344 (IOR)	LOGOUT	Antenna Power Supply		OK
Current Channel	NCS CC
Current TDM	NCS CC		Water Temperature		DEG
MES Status	Idle		Water Current
GPS Status	2D		Direction		DEG
	32818 Bytes free		Speed		KTS
DCE Memory			Depth
Current State: IDLE		UNSYNC	02-02-25 01:32 (UTC)
		NCS: IOR	LOGOUT	LAT: 34:30.00N
DCE F16 Ver. ##				LON: 135:00.00E

## = Version No. of RF CON Board

Standby display

After the diagnostic test has been completed, the equipment automatically starts synchronizing itself with a satellite. When the indication “Retuning” is replaced with “ SYNC(NCS), the synchronization process is completed. Then, you are ready to receiving EGC messages. For further details see paragraph 2.4.

1-6