Furuno 16 manual Data report menu regular interval reporting

5. DATA REPORTING AND POLLING

13.Choose DNID (Data Network ID) desired and press the [Enter] key. (LES ID and Member No. are automatically selected according to DNID.)14. Press the [↓] key to choose Activation.

14.Press the [Enter] key to open the activation options window.

15.Press the [↓] or [↑] key to choose “Regular Interval” or “Daily” as appropriate.

16.Press the [Enter] key to close the window.

17.Do one of the following depending on the selection you made at step 15. “Regular Interval” selected at step 15

(1)Press the [↓] key to choose Interval Time.

(2)Press the [Enter] key to open the interval time entry window.

(3)Key in the interval time. The interval should be at least 10 minutes.

(4)Press the [Enter] key to close the window.

(5)Press the [↓] key to choose Report Times.

(6)Press the [Enter] key to open the report times entry window.

(7)Key in the report times, or press the [Back Space] key to display “---“ to choose “No Limit” to transmit data until the “Status” setting is turned OFF.

(8)Press the [Enter] key to close the window.

“Daily” selected at step 15

(1)Press the [↓] key to choose Start Time 1.

(2)Press the [Enter] key to open the start time entry window.

(3)Key in the start time, in 24-hour notation.

(4)Press the [Enter] key to close the window.

(5)If necessary enter start times for Start Time 2-4.

18.Press the [Esc] key to show the update window.

		Data Report
Data Report Programming
	Status		OFF
	Report Length		Position and Course/Speed
	Destination
	DNID
	LES ID
	Member No.
	Activation		Regular Interval
	Interval Time		01:00
			24 (- - - : No Limit)
	Report Times
	Start Time1		- - : - -	Update
	Start Time2		- - : - -
	Start Time3		- - : - -		No
				Yes
	Start Time4		- - : - -

Data report menu (regular interval reporting)

19.Yes is selected; press the [Enter] key to register settings.

20.Press the [Esc] key to return to the standby display.

5-3