Furuno 16 manual Transmit message screen, Transmit Message

4.INMARSAT C OPERATIONS

13.Press the [Enter] key to open the confirmation window.

14.To request notification of delivery from the LES, choose ON. If not necessary choose OFF.

15.Press the [Enter] key to close the window.

16.Press the [↓] key to choose Send Delay.

17.Press the [Enter] key to open the send delay entry window.

18.To send a message after a certain delay, enter a time up to 99 hours 59 minutes. (The Send Delay is used to time message arrival to suit recipient’s office hours.)

19.Press the [Enter] key to close the window.

20.Press the [↓] key to choose Delivery Delay.

21.Press the [Enter] key to open the delivery delay options window.

22.Delivery Delay requests the LES for “Immediate” or “Deferred” transmission to the recipient designated. Press the [↑] or [↓] key to choose Immediate or Deferred. For information on this service, consult with LES where message is to be sent.

23.Press the [Enter] key to close the window.

24.Press the [↓] key to choose Code and press the [Enter] key.

25.Press the [↑] or [↓] key to choose “IA5 (for e-mail, fax) ”, “ITA2 (for telex)”, “DATA” or “SMS” as appropriate.

26.Press the [Enter] key to close the window.

27.Press the [↓] key to place the cursor on TRANSMIT.

28.Press the [Enter] key to open the start window.

		Transmit Message
Priority
	Normal
Message File	SEISETU.TXT
Station Name	FURUNO
Destination Type	TELEX
Prefix Code
Country/Ocean Code	81
Station ID	321
Modem Type
Address
Subject
Attach File
LES ID	303 (KDDI)
Option
Confirmation	ON
Send Delay	00:00
Delivery Delay	Immediate
Code	IA5
[ TRANSMIT ]

Size 46

Cost ********.** (US$)

Start

Yes No

Transmit message screen

29.Press the [Enter] key to send the message to the message queue. (To escape, choose “No” and press the [Enter] key.) The message “Message is entered in sending Queue. Press any key.” appears.

Note 1: If some data has not been entered, the message “Input Error: xx.” (xx: error content) appears.

Note 2: When you send a message which contains more than 32 KB of data, the message “Message file is too large (but sent only with 32 KB).” appears. The message is sent with only 32KB of data.

4-6