Furuno 16 manual Transmit Message Status, Displayed if toll charges have been entered. See para

4. INMARSAT C OPERATIONS

TRANSMIT MESSAGE STATUS

The terminal unit displays transmit message status as follows:

Message Send failed. This appears if the message could not be transmitted because of technical reasons such as satellite malfunction, signal degradation, or no reply from LES. Try to transmit the message again.

Message Send rejected. This appears when the LES rejects the message because of non-technical reasons such as unpaid subscriber's fee.

Message Send pending.This appears when the circuits at the LES are busy. Your message will be transmitted when a circuit becomes clear.

Transmitting a message to a station not registered on station list

1.Prepare message on the screen. For e-mail or SMS, set Text Mode in the Editor Setup menu to Ascii. See paragraph 3.2.3. For e-mail attachment, prepare the attachment and save it to the hard disk. SMS messages over 160 characters in length are sent in parts.

2.Press the [F3] key to display the Transmit menu.

3.Press the [1] key to show the Transmit Message menu.

Displayed if toll charges have been entered. See para. 2.6.1.

	File	Edit		Transmit	EGC		Reports Logs Options Setup			Position StopAlarm
			Transmit				<[1] UNTITLED1>
Not used.								Transmit Message
		Priority				Normal
		Message File				Message now being edited Size				24
		Station Name							Cost ********.**(US$)
		Destination Type				TELEX
		Prefix Code
		Country/Ocean Code
		Station ID
		Modem Type
	----	Address
		Subject
		Attach File
		LES ID
		Option
		Confirmation				ON
		Send Delay			00:00
		Delivery Delay				Immediate
		Code				IA5
		[ TRANSMIT ]

Transmit message menu

4-8