Furuno 16 manual Displaying EGC closed network ID ENID, 4-34

4. INMARSAT C OPERATIONS

4.4.2Displaying EGC closed network ID (ENID)

To join a FleetNETTM service, an MES must be registered with an information provider. The information provider adds the MES to the group which is to receive the service, by downloading a Group Call ID (via an LES which supports FleetNETTM broadcasts), uniquely addressed to the MES. The MES stores the ID and can accept broadcasts from the information provider. The MES operator cannot change this stored EGC closed network IDs (ENIDs). Up to 64 ENIDs are stored on a non-volatile memory.

The ENID stored can be accessed for downloading and deleting via the satellite path. It is possible for an MES operator to inhibit (or activate as required), via the terminal unit, selected ENIDs previously downloaded.

Along with the ENID the name of the information provider is stored. In the event that a download command is received and the ENID storage area is full, an ENID which has been inhibited (de-activated) by the MES operator will be written over. If none has been inhibited, then the new download is not accepted.

Follow the procedure below to inhibit or activate an ENID.

1.Press the [F4] key to display EGC menu.

2.Press the [2] key to display the EGC Network ID List.

File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm

EGC

1.EGC Network ID List

2.EGCENTER: Activate SPACE: Inhibit Ctrl+P: Print ESC: Quit Mark '*' means activation

01 * 00001 202 FURUNO

02 * 00002 202 FURUNO

03 * 04001 202 FURUNO

04 * 04002 202 FURUNO

05 * 04003 202 FURUNO

06 * 04005 202 FURUNO

07 * 04006 202 FURUNO

08 * 04007 202 FURUNO

EGC network ID list

3.Press the [↑] or [↓] key to choose the ENID you want inhibit (or activate).

4.Press the space bar to inhibit, or the [Enter] key to activate. The asterisk mark disappears when an ENID is inhibited.

5.Press the [Esc] key to return to the standby display.

4-34