Furuno 16 manual Setting a message report, PIN Code

5. DATA REPORTING AND POLLING

5.1.2Setting a message report

1. Press the [F5] key to display the Reports menu.

Reports

1.Data Report

2.Message Report

3.Data Network ID

Reports menu

2.Press the [2] key to display the Message Report menu. Four addresses may be registered.

Message Report

1.Message Report 1

2.Message Report 2

3.Message Report 3

4.Message Report 4

Message report menu

3. Press [1], [2], [3] or [4] as appropriate

Message Report

PIN Code

Message Report Programming

Status	OFF
Station Name
Destination Type	TELEX
Prefix Code
Country/Ocean Code
Station ID
Modem Type
Address
Subject
LES ID
Activation	Regular Interval
Interval Time	00:10
Report Times	1 (- - - : No Limit)
Start Time1	- - : - -
Start Time2	- - : - -
Start Time3	- - : - -
Start Time4	- - : - -
Report Contents	NAV
File

Message report menu

4.Press the [↓] key to choose Status.

5.Press the [Enter] key to open the status options window.

6.Press the [↓] or [↑] key to choose “ON” or “OFF” as appropriate. ON: Message report on

OFF: Message report off

7.Press the [Enter] key to close the window.

8.Press the [↓] key to choose Station Name.

9.Press the [Enter] key to display the Station List.

5-4