Furuno 16 manual Error Messages and Alerts, 1-12, Keying Sequence

1.OPERATIONAL OVERVIEW

3.Press the [↑] or [↓] key to choose option desired and press the [Enter] key.

4.Press the [Esc] key.

Note 1: On some menus the update window appears after you press the [Esc] key. This is done to ask you to confirm settings. Yes is selected in the Update window; press the [Enter] key to register settings, or press [→] to choose No and press the [Enter] key to escape.

Update

Yes No

Note 2: The following functions are not available:

Keying Sequence	Item
F3-1	Selection of Priority on Transmit Message
F8-1	NAV PORT, MESSAGE OUTPUT PORT, ACTIVE
	PORT, EGC OUTPUT PORT, NETWORK SETUP
	on System Setup menu
F8-4	Waypoint on EGC Setup

1.5Error Messages and Alerts

The terminal unit displays error messages and alerts to call your attention to misoperation, failed operation and system error. A list of error messages appears in Chapter 7 and alerts in the Appendix.

To erase an error message or alert, press the [Esc] key.

File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm

Log

1.Send Message Log

2.Receive Message Log

Send Message Log

No. Message File Station LES Priority Send Status Delivery

CAUTION

No Message.

<Press ESC key to continue>

Location of error messages and alerts

1-12