Furuno 16 manual Press the ↓ key twice to choose MES Operation Mode

2.SYSTEM INITIALIZATION

3.Press the [↓] key twice to choose MES Operation Mode.

4.Press the [Enter] key to open the MES operation mode options window.

Setup

System Setup

System Date & Time

IMN

MES Operation Mode

Nav Port

Active Port

Message Output Port

EGC Output Port

Network Setup

Command Window

01:53 02-02-25 (YY-MM-DD)

INMARSAT-C

INMARSATEGC-C

OFF

INT

EXT

EXT

System setup menu, MES operation mode options window

5.Press the [↓] or [↑] key to choose operating mode, INMARSAT-C or EGC. The INMARSAT-C setting provides telex communications and operates as an EGC receiver when the equipment is not transmitting or receiving. The EGC setting enables EGC-only operation. In this case, “Current State: EGC RECEIVER” (in reverse video) at the bottom of the screen.

6.Press the [Enter] key to close the window.

7.Press the [Esc] key to open the update window.

		Setup
			System Setup
	System Date & Time		01:53 02-02-25 (YY-MM-DD)
	IMN
	MES Operation Mode		INMARSAT-C
	Nav Port		INT
	Active Port		INT		Update
	Message Output Port		INT
	EGC Output Port			INT		No
					Yes
For technicians	Network Setup
	Command Window

8.Yes is selected; press the [Enter] key to update system settings.

9.Press the [Esc] key to return to the standby display.

Note: If the internal GPS malfunctions, enter data manually as below.

1.Choose System Date & Time from the System Setup menu and then press the [Enter] key.

Setup

	System
System Date & Time		0		1:0	253-0297-25-08	(YY-MM-DD)
IMN
		INMARSAT-C
MES Operation Mode
Nav Port		INT
Active Port		INT
Message Output Port		INT
EGC Output Port			INT
Network Setup
Command Window

Date and time entry window

2.Enter date with the numeric keys.

3.Press the [Enter] key to close the window.

2-2