Furuno 16 manual EGC setup, 2-10

2. SYSTEM INITIALIZATION

2.4.2EGC setup

The FELCOM 16 receives EGC messages directed to its present position and Navarea without further programming. The EGC Setup screen lets you choose additional areas for which to receive messages and also the Navtex station and type of message for Coastal Warning (NAVTEX Re-broadcast).

1. Press the [F8] key to display the Setup menu.

File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm

Setup

1.System Setup

2.Editor Setup

3.Terminal Setup

4.EGC Setup

5.Auto Mode Setup

6.E-Mail Setup

7.Directories

8.Configuration

Setup menu

2. Press the [4] key to display the EGC Setup menu.

			Setup		EGC Setup
	Receive EGC Area
		Additional Position				:	:
			Navarea
Not used.		Fixed Area
		Waypoint (from NAV Equipment)				OFF
	NAVTEX
		Station Code
		Type of Message (Can't reject other report)
		Ice reports		OFF		OMEGA messages		OFF
		Meteo. forecasts		OFF		SATNAV messages		OFF
		Pilot service		OFF		Other navaid msg		OFF
		DECCA messages		OFF		QRU (no message)		OFF
		LORAN messages		OFF

EGC setup menu

3.The cursor is selecting Additional Position, where you can enter the L/L position of an ocean region you want to receive broadcasts about. Press the [Enter] key to open the additional position entry window.

4.Enter position as follows:

a)Enter latitude (XX° XX).

b)Press the [N] or [S] key as appropriate to enter coordinate.

c)Enter longitude (XXX° XX).

d)Press the [E] or [W] key as appropriate enter coordinate.

5.Press the [Enter] key to close the additional position entry window.

6.Press the [↓] key to choose Navarea.

2-10