TL H.264 DVR User’s Manual
5.6.7.6Alarm In
This item allows users to enable/ disable alarm input detection. According to users’ application, select <N/O> (Normal Open) or <N/C> (Normal Close) to enable the alarm input detection, or select <OFF> to disable the detection.
If <N/C> is selected without installing any device, an alarm will be triggered and the Event Icon will always display on the monitor until the selection is changed to <N/O> or <OFF>, or when a device is installed.
5.6.7.7Alarm Out
This item allows users to enable/ disable the alarm output on the selected channel to activate the relay. The signal can be a light or siren to caution an alarm event. Select <ON> to enable the alarm output, or <OFF> to disable.
5.7Database Setup
The menu displays information of internal and external HDDs. In the main menu, select <Database Setup> and press ENTER. The following menu is displayed.
| Database Setup |
1. Total Size | xxx GB |
2. Free Size | (Circular) |
3. Avail. Rec Time | (Circular) |
4. Internal Disks |
|
NOTE: If the detection of HDDs fails, the message “HDD fail” will be displayed.
5.7.1Total / Free Size of HDD
Total Size shows the total storage capacity of HDDs that have been added to the database. Free Size indicates free storage space available for recording in the database, or “Circular” will be shown if the DVR is set to record in circular mode. Both of them are “read only”.
5.7.2Available Recording Time
The Avail Rec. Time indicates the available time duration for recording. If the DVR is set to record in circular mode, the item will show “Circular”. The information is “read only”.
75
