Speco Technologies 16TL, 8TL manual Install SpecoRemote

TL H.264 DVR User’s Manual

6.2.2Install SpecoRemote

Start the browser to initiate the installation of SpecoRemote on the PC. The IP address of the DVR can be saved as a Favorites item in the web browser to enable easy access in the future.

•Start the IE; it can be started either by clicking on the desktop icon, or by using the Start menu to access it.

•Enter the IP address of the DVR in the address bar at the top of the browser.

•The ActiveX controls and plug-ins dialog will show twice for confirmation; click <Yes> to accept ActiveX plug-ins. SpecoRemote plug-ins will be downloaded and installed on the PC automatically when the connection is successfully made.

NOTE: Do not enter any leading “0” characters in the address, for example, “192.068.080.006” should be entered as “192.68.80.6”. If the default trigger port 80 is changed into another one, take port 81 for example, the IP address should be entered as “192.68.80.6:81”.

•A version check starts to verify whether SpecoRemote was installed already, and also check if the version is the same as that stored in that particular DVR. This process may take up to 30 seconds.

•When the software is completely downloaded and installed, the Login Screen is now displayed.

86