Speco Technologies 8TL, 16TL manual 7 RS485 Setup, Unit ID, Baud Rate, Bits, EzDDNS

TL H.264 DVR User’s Manual

ezDDNS

ezDDNS enables the users to register for host name automatically. Press ENTER and select <Yes>. The following screen will be displayed:

ezDDNS Submit/update ok! Host name is XXXX_XXXXXX Press any key to return

NOTE: The DVR must be connected to the *Real IP address, or be assigned a specific port using **Port Forwarding technique.

*A "Real IP" is the IP address that is assigned by users’ ISP.

**A "Virtual IP" is the IP address assigned either manually or through DHCP. When the user is assigned a Virtual IP, the user must use Port Forwarding technique to assign a specific port to the DVR.

5.1.7RS485 Setup

This menu allows the user to setup the parameters of the unit’s RS-485 communications port. From the System Setup menu, select <RS485 Setup> and press ENTER. The following menu is displayed.

		RS485 Setup
1.	Unit ID	224
2.	Baud Rate	9600
3.	Bits	8
4.	Stop	1
5.	Parity	None

5.1.7.1Unit ID

This item is used to change the RS-485 ID address of the DVR. The ID is in the range of <1> to <255>.

5.1.7.2Baud Rate

The Baud rate options for associated with the protocol are <2400>, <4800>, <9600>, <19200>, <38400>, and <57600>..

5.1.7.3Bits

Users can specify the bits in a word associated with this protocol. The available options are <6>, <7> and <8> bits.

57