Speco Technologies 8TL, 16TL manual Ntsc

Models: 16TL 8TL

1 102
Download 102 pages 20.37 Kb
Page 66
Image 66

TL H.264 DVR User’s Manual

5.4.3Preset Record Configuration

The <Preset Config> is used to select the preset recording quality and frame rate. Different preset recording quality levels are offered for users to choose: <Best Quality>, <Standard>, <Extended Record>, <Event Only>, <ezRecord >, <512Kbps DSL>, <256Kbps DSL>, <128Kbps DSL>, and <OFF>. According to various Record modes, the preset configuration options for normal and event status are described in terms of relative recording rate PPS (Picture Per Second) and recording size for each channel in the table below.

These preset conditions <Best Quality>, <Standard>, <Extended Record>, <Event Only>, <ezRecord >, <512Kbps DSL>, <256Kbps DSL>, and < selected, the channels not connected to cameras will not be recorded. In128Kbps DSL> override any other quality and rate settings. Refer to the table below for file sizes of different preset conditions for DVR-16TL. Note that <Event Only> and <ezRecord> are not included in the table because there are further details for these two settings. <Event Only> will be described in <Event Setup> section. <ezRecord> will be explained in <ezRecord Setup> section.

NTSC

720 X 480 @ 60PPS

720 X 240 @ 120PPS

360 X 240 @ 240PPS

PAL

720 X 576 @ 50PPS

720 X 288 @ 100PPS

360 X 288 @ 200PPS

Best

22 KB/Pic

12 KB/Pic

6 KB/Pic

Standard

14 KB/Pic

8 KB/Pic

4 KB/Pic

Extended

6 KB/Pic

4 KB/Pic

2 KB/Pic

512Kbps DSL

 

4 KB/Pic

 

256Kbps DSL

 

3 KB/Pic

 

128Kbps DSL

 

2 KB/Pic

 

NOTE: The total PPS is equally shared by all channels, which means, even if one channel has not been connected with a camera, the channel still reserves its share of PPS. However, if <ezRecord> is other words, the total PPS will be shared by channels with cameras connected only.

65

Page 66
Image 66
Speco Technologies 8TL, 16TL manual Ntsc