TL H.264 DVR User’s Manual

4.5.2Dome Protocol Setup

The Dome Protocol item lists the available dome protocols for communicating with dome cameras connected to the DVR. From the Main menu, select <Camera Setup> and press ENTER. The following menu is displayed.

 

Analog Camera

 

1.

Analog Camera Select

CH1

2.

Dome Protocol

None

3.

Dome ID

0

4.

Camera Title

 

5.

Covert

No

6.

Brightness

0

7.

Contrast

0

8.

Saturation

0

9.

Hue

0

10. Audio Association

Yes

To configure dome protocol, select a camera first and set the communications protocol associated with dome camera using the Direction keys and ENTER.

NOTE: The settings become effective after saving the changes and exiting from the menu.

4.5.3RS485 Setup

The DVR controls the domes via RS-485 communication protocol. The RS-485 parameters in the DVR must be set to the same parameters set in dome camera.

Users are allowed to change the RS-485 settings of the DVR. Select <System Setup> in Main menu, then select <RS485 Setup> from the System Setup menu and press ENTER. The following menu is displayed.

 

 

RS485 Setup

1.

Unit ID

224

2.

Baud Rate

9600

3.

Bits

8

4.

Stop

1

5.

Parity

None

36

Page 37
Image 37
Speco Technologies 16TL, 8TL manual Dome Protocol Setup, 3 RS485 Setup