9493 XRS
Settings
Your Detector
What to Remember While Using IntelliMute
IntelliMute works with both City and Auto Mute modes.
Whenever your engine revs are below the activation point,
the dot next to the large character on the right side of the display will remain lit. Above the activation point, the dot will blink twice every two seconds.
Below Activation Point | Above Activation Point |
X K Ka V S c | X K Ka V S c |
If, for any reason, the unit stops sensing your engine’s revs,
IntelliMute will indicate an error and automatically turn off.
The rev point you set will be stored in the unit’s memory when power is turned off and recalled each time the power is turned on.
NOTE
The rev point must be reset if you use your detector in a different vehicle.
NOTE
When initially choosing your IntelliMute activation point, a setting of approximately 300 to 600 RPMs above idle is recommended. You can reset the activation point at any time to fit your individual preferences and driving style.
Setting the IntelliMute Activation Point
Your detector must be installed in your vehicle.
CAUTION
Do not attempt to set the rev point while driving.
Your vehicle should be parked and idling.
IntelliMute must be turned on before setting the activation point. Depending on whether the unit is in Tone Alert or Voice Alert mode, you will hear a series of beeps or voice messages as you follow the steps on page 11.
10 English
Settings
Your Detector
IntelliMute Button |
|
|
|
|
|
|
|
|
|
Press and release |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
To Set the IntelliMute Activation Point |
|
|
|
| |||||
|
|
|
|
|
|
|
|
| |
Press and hold | Tone | Voice |
| Visual Display |
| ||||
the IntelliMute |
|
|
|
|
|
|
|
|
|
Two beeps | Set Engine Revs |
| None |
| |||||
button for two |
|
| |||||||
|
|
|
|
|
|
|
|
| |
seconds. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rev your engine to | None | None |
| Three bars will |
| ||||
the level you wish |
|
|
|
|
| flash in succession | |||
to set (recommend |
|
|
|
|
| 1 | 2 | 3 | |
slightly above idle) |
|
|
|
|
|
|
|
|
|
and hold revs steady |
|
|
|
|
|
|
|
|
|
for two seconds. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
At the desired | Three beeps | IntelliMute Set |
| All three bars flash | |||||
rev level, press |
|
|
|
|
| three times |
| ||
and release the |
|
|
|
|
| 1 | 2 | 3 | |
IntelliMute |
|
|
|
|
|
|
|
|
|
button. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| NOTE |
|
|
|
|
|
|
|
|
| If the unit is unable to sense usable pulses within three |
| ||||||
|
| seconds or if you do not set a rev point within 20 seconds | |||||||
|
| of beginning these steps, IntelliMute will indicate an error |
| ||||||
|
| and automatically turn off. |
|
|
|
| |||
|
|
|
|
|
|
| |||
|
| Tone |
| Voice |
| Visual Display | |||
|
| Four beeps |
| IntelliMute Error, |
| E appears |
| ||
|
|
|
| followed by |
|
|
|
| |
|
|
|
| IntelliMute Off |
|
| X K Ka V S E | ||
|
|
|
|
|
|
|
|
|
|
Nothing Comes Close to a Cobra® 11