Furuno FR-8251, FR-8111 manual Waypoint Display, Outputting Cursor Position TLL data

7)Select pulselength and press the ENTER/SE- LECT key.

8)Press the ENTER/SELECT key.

9)Press the MENU key.

7)Press the ENTER/SELECT key.

8)Press the MENU key.

	SPEED
HDG 123.4°
	MANUAL 30.0kt

Table 1-2 Default pulselength settings

Range	0.75	1.5	3	6	12	24
PL Set	M1P	M1P	M2P	LP	LP	LP
No.1
PL Set	SP	SP	M1P	M2P	LP	LP
No.2

Selecting pulselength set to use

Select pulselength set on P/L SEL of the ECHO SIG menu.

0.25 NM

0.05

ZOOM SP

HU

TRU TRAIL

AUTO 00:45 30M

GUARD1

GUARD2

IN

External waypoint

1)Press the MENU key.

2)Select the ECHO SIG menu.

3)Press the ENTER/SELECT key.

4)Select P/L SET and press the ENTER/SE- LECT key.

5)Select P/L1 (or P/L2).

6)Press the ENTER/SELECT key.

7)Press the MENU key.

1.35 Waypoint Display

A waypoint selected on a radionav equipment can be displayed on the radar. This function requires a compass signal.

1)Press the MENU key.

2)Select the INITIAL menu.

3)Press the ENTER/SELECT key.

4)Select NAV DATA and press the ENTER/SE- LECT key.

5)Select EXT WP and press the ENTER/SE- LECT key.

6)Select ON (or OFF).

A/C	NR
F3	IR2
L-ES	ES1
	EAV1
345.6°R EBL	VRM 0.080nm
23.0°R	0.220nm
29:59	+ 105.0°R 00.74nm TTG 12:34

Figure 1-28 Displaying an external waypoint

1.36Outputting Cursor Position (TLL data)

Cursor position can be output to external equip- ment, in IEC 1162 format, by pressing the VRM (TLL) control. This function requires position data and a compass signal.

1 – 26