Furuno NX-700A/B manual Antenna cable, For RG-10/UY, RG-214 cable

Page 54

4. INSTALLATION

Antenna cable

Be sure to leave some slack in the cable for future service and maintenance.

For RG-10/UY, RG-214 cable

When using the coaxial cable, type RG-10/UY or RG-214, attach the FM-MP-7 connector (supplied as installation material) or PL-259 (local supply) as below.

1.Remove the sheath by 30 mm.

2.Bare 23 mm of the center conductor. Trim braided shield by 5 mm and tin.

3.Slide coupling ring onto cable.

4.Screw the plug assembly on the cable.

5.Solder plug assembly to braided shield through solder holes. Solder contact sleeve to conductor.

6.Screw coupling ring into plug assembly.

Sheath

Braided shield

5 mm

30 mm		Plug assembly	Contact sleeve


2 mm

Solder here.

Conductor

Cut conductor here.

Insulator

Solder both

Coupling ring

sides of hole.

Note: When the RG-214 cable is used, care must be exercised to prevent damage to the cable as it has no armor.

4-8

Image 54

Contents Navtex Receiver 00015280413 Important Notice Safety Instructions Safety information for the Installer Forword Features Table of Contents Vii Equipment Lists Name Type Code No Qty RemarksOptional Supply System Configurations Receiver UnitPrinciple of Navtex System How Navtex WorksNavtex System Operation Message Format NnnnNavtex Station Map Navtex Station List III NAV Latitude Longitude Freq Area Station Broadcast schedule UTC XII Turning the Unit On/Off OperationOperating Controls Display unit, front viewAdjusting LCD Dimmer All message display 518 kHzConfirming the New Message SAR Search and Rescue messageOther messages Sample Messages Message list Detailed messageMain menu Choosing the Receive ModeMask mode options Navtex menuEditing the Settings for Station and Message Choosing the Local FrequencyRcv Mask Auto Edit window ex. Rcv MaskWhen receiving SAR Search and Rescue message Switching the Frequency to DisplayAlarm Messages When receiving Warning message A/B/LList options Processing MessagesChoosing messages to display Urgent messageAll Messages Protecting message from deletingPrinting all messages displayed Canceling printingPrinting Messages Print optionsAdding Navtex station Service menuEditing the Navtex Station List Edit station list displayNavArea New addition windowEditing Navtex station Edit window Ex. Navtex station OostendeDeleting Navtex stations Icons Icon Status Meaning Status icon shown at the tip of displayMessage icon shown next to messages Messages List Message Meaning RemedyOther Functions Navtex menuSystem menu Nav Data Display menu Description SettingSkips to $$ DistanceService menu Description Setting INSThis page is intentionally left blank Maintenance program Maintenance & TroubleshootingMaintenance Check point RemedyFuse Replacement of Fuse, Battery and Thermal PaperBattery LCD DisplayThermal paper NX-700A only Troubleshooting Diagnostics Memory testKey test Restoring all Default Settings Rx testInstallation Display UnitTabletop, overhead mounting Flush mounting For NX-700AFor NX-700B Receiver Unit General mounting considerationsMounting Method Antenna Unit Mounting considerations Wiring Printer NX-700B onlyReceiver unit Receiver unit, inside viewHow to use J402 and 403 connector TTYCS-1Q For Navigator or INSAntenna cable For RG-10/UY, RG-214 cableExtending antenna cable length GroundingSetting of Printer NavtexDigital Interfacing PriorityGLL Latitude and longitude NRM Navtex receiver mask RMC Recommend Minimum Specific Gnss Data ZDA Time and date $--ACK,xxx*hhCRLF Local alarm numberidentifier Checksum ACK AcknowledgeVHW Water speed and heading VTG Course over ground and ground speedVBW Dual ground/water speed PFEC,nxfrq Local FrequencyOutput data description NRX New Navtex received message ALR Set alarms Serial InterfaceMenu Tree NavtexFuruno Specifications of Navtex Receiver Furuno ＰａｃｋｉｎｇＬｉｓｔ NX-700B/NX-700B-HK/NX-700B-R NX-7001-AN*/BN*/-R NX-7001-AA-*/BA NX-7H-0-10/-10-HK,NX-7H-0-20/-20-HK 工事材料表 08AW-X-9402 08AW-X-9403 Installation Materials 08AW-X-9404 000-157-479-10 Page Page Page Page Page 取付位置 Navtex Receiver Index Processing0560