Leica MX535 manual Table of Contents

Table of Contents

1	General	1
1.1	Software Releases	1
1.2	General Recommendations for Installation, Maintenance and Repair Work	1
1.3	Safety Warnings	1
2	Overview	3
2.1	Supplied Equipment	3
2.2	Compatibility with Other Systems	3
2.3	MX535 Transponder with MX420 CDU	4
2.4	MX535 Transponder Overview	5
3	Installation	6
3.1	General Requirements	6

3.2Installation Overview

3.2.1	Survey	6
3.2.2	Step-by-step Installation Procedure	6
3.2.3	MX535 Connection Diagram	7
3.3	Components and Interfaces	7
3.3.1	General Interface Description	8
3.3.2	Interface NMEA Description	9
3.3.2.1	Sensor – Interface CH1, CH2, CH3	9
3.3.2.2	ECDIS – Presentation Interface CH4	9
3.3.2.3	PILOT Port CH5	10
3.3.2.4	LONG RANGE CH8	10
3.3.2.5	DGPS – DGNSS CH9	11
3.3.2.6	ALARM CIRCUIT	11
3.4	Sensor Interface Definitions	11
3.4.1	Sensor Notes	12
3.4.2	Sensor Hardware Installation	13
3.4.3	Priority Handling of Sensor Sentence	14
3.4.4	Pin-Description AIS Cable/Socket 50-Pins	19
3.5	Installation of VHF/GPS Antennas	21
3.5.1	VHF Antenna Installation	21
3.5.2	GNSS Antenna Installation	22
3.6	Specific Recommendations	23
3.6.1	Recommendations Concerning AIS Systems	23
3.6.2	Recommendations Concerning Installation of Transponder Unit	23
3.6.3	Recommendations Concerning Installation of VHF Antenna	23
3.6.4	Recommendations Concerning Installation of GPS Antenna	23
3.6.5	Recommendations Concerning Redundancy	24
3.6.6	Emergency Power Source	24