Furuno FAR-2157 installation manual Connecting wires to the housing

Page 71

5. Attach the DVI-RGB CONVERSION board to the location shown below.

 

DVI-RGB

 

 

CONVERSION board

J3 (Connect DVI cable at step 9.)

J4

J9

 

 

 

Fixing the DVI-RGB conversion board inside the processor unit

6.Attach the 10-pin connector from J1 on the 03P9229B board to J9 on the DVI-RGB board.

7.Attach the connector assembly 03-2092 to J4 on the DVI-RGB CONVERSION board.

8.Remove connector housing J615 from the 03P9342 board. Connect the cable from J3 on the 03P9229B board and the cable from J4 on the DVI-RGB CONVERSION board to J615. Attach J615 to the 03P9342 board.

To connect wires to the WAGO connector, use the terminal opener (supplied as installation materials) as shown below.

Terminal opener

J615 Housing

1) Press downward.

BRN RED ORG YEL

GRN

1

2

3

4

5

2) Insert core.

Connecting wires to the housing

9.Connect the DVI cable to J3 on the DVI-RGB CONVERSION board. Connect the end that does not have the ferrite core.

10.Pass an RGB cable (local supply) through the cable clamp and connect it to J2 on the 03P9229B board.

11.Pass the DVI cable through the cable clamp, laying the section with copper tape in the cable clamp.

12.Assemble the processor unit and connect the other end of the DVI cable to the DVI-D port.

4-15

Image 71
Contents Installation manual 00014869215 Safety Instructions Use only the specified power cables Iii System ConfigurationName Type Code No Qty Remarks Standard supplyOptional equipment DVI-RGB Name Type Code No RemarksThis page is intentionally left blank Mounting Antenna UnitMounting considerations SitingAssembling the antenna unit How to coat waveguide flange with silicon rubberName Type Qty How to attach hoisting ropes to antenna unit How to hoist antenna unitFastening antenna unit to the mounting platform Coat with anticorrosive sealant How to mount the antenna unitFlush mounting Mounting procedureMonitor Unit Desktop mounting Contents of desktop mounting kit FP03-09820Attaching hand grips Fixing with KB keyboard fixing plate Control UnitFixing without KB fixing plate Mounting dimensions for control unit RCU-014Mounting dimensions for control unit RCU-015/RCU-016 Contents of flush mount kit for RCU-014/015/016 Control unit RCU-014, inside view Connecting RCU-016 in series with RCU-014Changing cable entrance on control unit RCU-015/RCU-016 Changing the cable entrance on control unit RCU-015/RCU-016Processor Unit Mounting dimensions for processor unitMounting dimensions for power supply unit Power Supply UnitWiring Overview WiringAntenna unit, front view Fabricating signal cable RW-9600Fabricating signal cable RW-9600 TB801 PCB 03P9436 Cable gland for signal cable RW-9600 Procedure How to wire Wago connectorHow to fasten coaxial conductor Passing flat washer, etc. onto HV cable Fabricating HV cable TYPCY-1.5 and power cable TYPCY-2.5How to fabricate HV cable TYPCY-1.5 Passing flat washer, etc. onto power cable How to fabricate power cable TYPCY-2.5Fabricating power cable DPYC-2.5 Fabricating the power cable DPYC-2.5Fabricating power cable DPYC-2.5 Cable XH10P-W-5P-A L=10/20/30M Connection of cablesProcessor unit, rear view Cable XH10P-W-6P L=20/30MLocation of connectors inside the processor unit Location of connectorsPower cable TPYC-1.5 Signal cable RW-9600 Between antenna unit and processor unitPort Conventional remote display FAR-2157 Connection of Sub-displayTerminal TB1 cable DPYC-2.5 Power supply unit, inside viewFabricating cable connected to terminal TB1, TB2, TB3 Armor Processor unit, inside view Changing AC Power SpecificationPower supply Fuse Jumper connector P108 Processor unitHow to adjust the overvoltage detection circuit Power Fuse Jumper connector P8 Power supply unitInitializing Tuning AdjustmentsHeading alignment Heading AlignmentEcho ADJ menu For Control Unit RCU-014For Control Unit RCU-015 Initialize menuHow to access the Initialize Menu with Control Unit RCU-015 Examples of correct and incorrect sweep timings Adjusting Sweep TimingSuppressing Main Bang Echo menu setting Other SettingsANT SW and ANT Stopped Scanner menuBlind Sector 1 and Blind Sector On Time and TX Time Installation menuRadar no and Radar Posn GPS 1 ANT Posn and GPS 2 ANT Posn OWN Ship Info menuLENGTH/WIDTH, Scanner Posn and SUB Scanner Posn ARP-related menus Arpa Preset menuARP W/O Gyro Not shown on IMO radar ANT Select Other menu Other menuEAV w/o Gyro This page intentionally left blank Gyro Converter GC-10 Installing the Gyro Converter boardFixing Gyro Converter board inside the processor unit Wiring Wago connector Connecting connector assemblies inside processor unitAttaching plastic cover for Gyro Converter board Connection of external power supply to Gyro Converter board Connection of external power supplyDIP switch, jumper wire settings Default settingJP1 JP1 JP2 JP3 JP4 JP5 Setting method 2 by make and model of gyrocompassGyro Converter board 64P1106HDG menu Setting the heading readout on the radar displayMemory Card Interface Unit Flush mounting dimensions for memory card interface unitOne memory card if unit and multiple processor units ConnectionsDesktop mount One memory card if unit and one processor unitType Code No Contents DVI-RGB Conversion Kit How to wire the DVI-RBG conversion boardProcessor unit bottom chassis Processor unit, side viewConnecting wires to the housing DVI-RGB BNC Connector ConverterOutput Data Specifications Contents RemarksInput Sentence IEC 61162 input sentence and priorityIEC 61162 output sentence Sentence and order of priority45$545$5 #  76.+0 +26+10%1& 52 427 52 257 #%8 . . .   GC-10 $40# Page Page May 1707 R.Esumi Sep/2010 Y.NISHIYAMA Page Jan.1808 R.Esumi Apr.2307 R.Esumi Apr.2307 R.Esumi Apr.2307 R.Esumi Apr.2307 R.Esumi Apr.2307 R.Esumi Page Page Page Page Page Page Page Page Page Marine RADAR/ARPA

FAR-2157 specifications

The Furuno FAR-2157 is a cutting-edge radar system specifically designed for marine applications, offering superior performance and advanced features. As part of the renowned FAR series, the FAR-2157 stands out with its impressive capabilities, making it essential for navigating both commercial and leisure vessels.

One of the main features of the FAR-2157 is its 12 kW transmitter, which facilitates long-range detection and precise target tracking. The radar operates on the X-band frequency, ensuring high-resolution imagery and outstanding target separation in various conditions. This enables operators to detect small targets and navigate safely, even in congested waters.

Equipped with Furuno's advanced Digital Signal Processing (DSP) technology, the FAR-2157 enhances target detection by reducing clutter and improving signal clarity. This results in an increased ability to identify vessels, buoys, and landmasses, thereby greatly enhancing situational awareness. The radar is designed to automatically adjust gain, sea clutter, and rain clutter settings, allowing for consistently optimal performance without the need for constant manual intervention.

Another notable characteristic of the FAR-2157 is its ability to integrate with other onboard systems such as chart plotters and AIS (Automatic Identification System). This integration allows for the seamless overlay of radar data onto electronic charts, enabling mariners to monitor navigation and potential hazards in real time. Additionally, the radar supports the MARPA (Mini Automatic Radar Plotting Aid) system, allowing users to track the movement of multiple targets and predict their future positions, aiding in collision avoidance.

The user interface of the FAR-2157 is designed with simplicity in mind, featuring a large and intuitive display. The menu-driven setup and user-friendly controls ensure that operators can easily access essential functions and settings. Furthermore, the display is sunlight-readable, which is crucial for visibility in bright conditions.

The Furuno FAR-2157 is built to withstand the rigors of the maritime environment. It is equipped with a rugged dome antenna, ensuring durability against harsh weather conditions and vibrations. The system also includes a built-in self-diagnosis function, which helps maintain optimal performance by identifying potential issues before they become critical.

Overall, the Furuno FAR-2157 radar system combines advanced technology with user-friendly features, making it an ideal choice for marine professionals seeking reliable and efficient navigation assistance. With its powerful capabilities, the FAR-2157 enhances safety and efficiency on the water, making it a valuable addition to any vessel's navigation suite.