2.13Selecting the Display Mode
The display mode may be selected with the [DISP MODE] key. Four modes are avail- able (with navigation input): Normal, Nor- mal + Window, Normal + Nav Data, and Normal + Window + Nav Data.
Each time the key is pressed the display mode changes in one of the sequences shown below, depending on equipment connected and menu settings.
Note: In the window display mode, the [DISP MODE] key reselects zoom area. To select the display mode while in the window display mode, press the key twice.
Window Display | WIDE | / | ZOOM |
Nav Display | ON | / | OFF |
VRM | EBL | +CURSOR | VRM | EBL |
**.** NM | ***.*°R | ***.**NM ***.*° R | **.** NM | ***.*°R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ZOOM
+CURSOR
***.**NM ***.*° R
Window Display | WIDE | / | ZOOM |
Nav Display | ON | / | OFF |
VRM | EBL | +CURSOR |
**.** NM | ***.*°R | ***.**NM ***.*° R |
|
| ZOOM |
VRM | EBL | +CURSOR |
**.** NM | ***.*°R | ***.**NM ***.*° R |
Figure 2-11 Display modes
11