Furuno FAR-2107 specifications Trail Color Shift

Page 4

1.3Trail Color Shift

When there are many trails on the screen, especially when using long trails, it is diffi- cult to distinguish past tracks from current tracks since they are the same color. With the trail color shift feature, tracks are painted in a different color from the point when color shift is activated. For example, the current track color is 1: FUCHSIA. Then, at the moment the trail color shift is made active, trails from that point will be painted in 2: MAROON.

Target

Echo trail

Trail color before shift

1:FUCHSIA

2:MAROON 3:RED 4:PPL

5:YEL

Target

Trail color after shift

Fuchsia color displayed up to this point

2:MAROON 3:RED 4:PPL 5:YEL 6:LIME

Note: At the moment the trail color shift is activated, the trail colors in effect after the time set in the TRAIL MODE box are erased. For example, the trail length is 12 HOURS and the time set in the TRAIL MODE box is 05:00. Then, using the illustration above as an example, 6: LIME will not be shown.

2 TRAIL GRAD in the TRAIL menu must be set to SINGLE and 8 TRAIL LENGTH to other than NORMAL in order to activate the trail color shift feature.

1.Right-click the TRAIL MODE box.

2.Select 0 [TRAIL COLOR] then push the left button.

[TRAIL COLOR]

1BACK

2COLOR SHIFT NO/YES

3TRAIL COLOR

1:FUCHSIA

2:MAROON

3:RED

4:PURPLE

5:YELLOW

6:LIME

7:GREEN

8:OLIVE

9:TEAL

10:CYAN

11:BLUE

12:NAVY

3.Select 2 COLOR SHIFT then push the left button.

4.Select YES then push the left button.

5.Push the right button twice to close the menu.

4

Image 4

Contents Marine Radar Target Trail Functions Long TrailsTrail Color Trail Color Shift Hiding Trails Trail Eraser Preventing True Sea Clutter Trails Narrow TrailsRight-click to close the menu Cursors Crosshairs Cursor SizeActivating the net cursor Net CursorSelect 8 Cursor Shape then push the left button Select Front Half Length then push the left button Cursor Data Display Bearing Scale Format Other Functions Echo Display AreaTurning On-screen Boxes On/Off Press the F2 keyRadar Picture Color RIght-click the box to show the BRILL1 menuBearing Reference EBL1VRM, Cursor Unit Pop-up GuidanceDefault functions of F1, F2 and F3 keys Function Keys F1 F4F1, F2 and F3 Keys Operating F1, F2 and F3 keysProgramming the F1, F2 and F3 keys F1-1-ECHO Function Settings Functions available with F1-F3 keys Echo categoryFunctions available with F1-F3 keys STD KEY category Vector TimeFunctions available with F1-F3 keys Arpais category Target DATA&ACQFunctions available with F1-F3 keys Operation category Functions available with F1-F3 keys Picture categoryOWN Ship Mark Prohibited Area Operating the F4 Key Registering a program to the F4 keyMenu functions recordable to F4 key Display menu main menuFunctions recordable to the F4 key NAV LINE/WPT menu main menuOn-screen box operations recordable to the F4 key Operating the F4 keyPress the F4 key to show the F4 Execution menu Anchor Watch Alarm Depth Contour with Depth Indication Video Plotter FunctionsDepth indication can be shown on depth contours Mark Settings Push the right button to show the Mark 1/2 menuEntering mark comment, changing mark position Select 1 Comment then push the left buttonSelecting mark color Track Settings Track recording intervalChanging track color Changing the color of your ship’s trackAuto Target Track status and track color Auto Target Track on Auto Target Track OFF ALLErasing track with the cursor Selecting erasure methodErasing all track of a target Erasing track between two points, areaAutomatically displaying other target tracks Enabling, disabling GPS buoy information GPS BuoyErasing all tracks of GPS buoys ARP Symbols Displaying Picture from External Radar Right click to show the ANT Information menuMenu Overview Menu treeTrial TGT Data ACTUAL, Trial Current OFF, on MAP Mark Color Disp WPT no STD KEY ARP/AIS Operation Picture Combine Range Pop-up menus access by Antenna Information 00016425511