Furuno FAR-2107 specifications Trail Color

Page 3

1.2Trail Color

The color of target trails may be chosen from among fuchsia, maroon, red, purple, yellow, lime, green, olive, teal, cyan, blue, and navy, when 2 TRAIL GRAD and 8 TRAIL LENGTH on the TRAIL menu are set for SINGLE and other than NORMAL, respectively.

1.Right-click the TRAIL MODE box.

2.Select 0 [TRAIL COLOR] then push the left button.

[TRAIL COLOR]

1BACK

2COLOR SHIFT NO/YES

3TRAIL COLOR

1:FUCHSIA

2:MAROON

3:RED

4:PURPLE

5:YELLOW

6:LIME

7:GREEN

8:OLIVE

9:TEAL

10:CYAN

11:BLUE

12:NAVY

Note: 3 TRAIL COLOR shows numbers from 1 to 12 and the color currently selected for each number. Trail color changes at intervals according to trail length setting as follows:

12 hour trails: Trail color changes once every hour.

24 hour trails: Trail color changes once every two hours.

48 hour trails: Trail color changes once every four hours.

The color of the track will change in the color order specified here when 3 COLOR SHIFT (see the next page) is activated. These colors can be changed by con- tinuing this procedure.

3.Select 3 TRAIL COLOR then push the left button. The cursor is choosing color number 1.

4.Select color desired then push the left button.

5.Set colors for other numbers similarly. (Push the left button to select color number.)

6.Push the right button three times to close the menu.

3

Image 3
Contents Marine Radar Long Trails Target Trail FunctionsTrail Color Trail Color Shift Hiding Trails Trail Eraser Narrow Trails Preventing True Sea Clutter TrailsRight-click to close the menu Crosshairs Cursor Size CursorsNet Cursor Activating the net cursorSelect 8 Cursor Shape then push the left button Select Front Half Length then push the left button Cursor Data Display Bearing Scale Format Echo Display Area Other FunctionsPress the F2 key Turning On-screen Boxes On/OffRIght-click the box to show the BRILL1 menu Radar Picture ColorEBL1 Bearing ReferencePop-up Guidance VRM, Cursor UnitOperating F1, F2 and F3 keys Default functions of F1, F2 and F3 keysFunction Keys F1 F4 F1, F2 and F3 KeysProgramming the F1, F2 and F3 keys F1-1-ECHO Functions available with F1-F3 keys Echo category Function SettingsVector Time Functions available with F1-F3 keys STD KEY categoryTarget DATA&ACQ Functions available with F1-F3 keys Arpais categoryFunctions available with F1-F3 keys Picture category Functions available with F1-F3 keys Operation categoryOWN Ship Mark Prohibited Area Registering a program to the F4 key Operating the F4 KeyDisplay menu main menu Menu functions recordable to F4 keyNAV LINE/WPT menu main menu Functions recordable to the F4 keyOperating the F4 key On-screen box operations recordable to the F4 keyPress the F4 key to show the F4 Execution menu Anchor Watch Alarm Video Plotter Functions Depth Contour with Depth IndicationDepth indication can be shown on depth contours Push the right button to show the Mark 1/2 menu Mark SettingsSelect 1 Comment then push the left button Entering mark comment, changing mark positionSelecting mark color Track recording interval Track SettingsChanging the color of your ship’s track Changing track colorAuto Target Track on Auto Target Track OFF ALL Auto Target Track status and track colorSelecting erasure method Erasing track with the cursorErasing track between two points, area Erasing all track of a targetAutomatically displaying other target tracks GPS Buoy Enabling, disabling GPS buoy informationErasing all tracks of GPS buoys ARP Symbols Right click to show the ANT Information menu Displaying Picture from External RadarMenu tree Menu OverviewTrial TGT Data ACTUAL, Trial Current OFF, on MAP Mark Color Disp WPT no STD KEY ARP/AIS Operation Picture Combine Range Pop-up menus access by Antenna Information 00016425511