7.0Pole Mounted SART
1.The PathFinderTM3 is supplied with a telescopic pole to raise the SART one meter above sea level (see figure 5).
2.To operate, simply turn the bottom cap of the SART to release the pole.
3.Pull the pole downward and extend it to its maximum length.
4.To lock pole in position pull firmly across pole joints while twisting slightly.
5.Tie Lanyard to life raft to allow retrieval should the SART fall into the water.
6.Push SART through life raft observation port and place foot of pole in pocket at base of life raft.
7.Use life raft ties to hold SART pole near vertical.
8.Ensure SART is not obscured by metal objects or inflatable Radar reflectors.
9.Periodically check to see if SART is still vertical.
1 Meter
Minimum
Figure 5
10 |
|