ACR Electronics 2714 manual Hanging Sart

Page 11

8.0Hanging SART

1.If no pole is available, or if you prefer, you can suspend the SART from the canopy support using the additional lanyard loop provided (See figure 6).

2.Loop the lanyard through the support strap in the life raft and secure firmly.

3.The SART should be as high as possible and at least 1m above sea level. Ensure SART is not obscured by metal objects or inflatable Radar reflectors.

1 Meter

Minimum

Figure 6

11	Y1-03-0170 Rev. B

Image 11

Contents ACR Electronics, Inc PathFinderForward Table of ContentsY1-03-0170 Rev. B Radar Screen Sart OverviewIntroduction Y1-03-0170 Rev. B Vessel name Contains Lithium BatteryUsing an indelible pen Activation Life raft stowageSequence of Operations Pole Mounted Sart Hanging Sart Vessel Mounting InstallationInstalling the Sart Multiple Sart Interrogation Test Testing and MaintenanceEnsure the lanyard is not tied to any part of the vessel Confidence checkServicing Battery Pack ReplacementReplacement Battery label General Technical SpecificationsTransportation Receiver BatteryAntenna TransmitterWarranty Standard’s ProductNotified Body Type Examination