Pioneer AVH-P5150DVD Interlaced Basalt/Carbon Fiber Reinforced Impp Cone, Shallow-Type Subwoofers

Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone

TS-W3002D4	TS-W2502D4	TS-W308D2	TS-W308D4	TS-W258D2	TS-W258D4	TS-W308F
TS-W258F	TS-SW3001S4	TS-SW3001S2	TS-SW2501S4	TS-SW2501S2
To ensure that you get more natural bass, we’ve			a cone that is lightweight, rigid, well damped, stable
incorporated out new Basalt fiber technology into			in temperature extremes, and more environmentally
our subwoofers. The volcanic-rock fibers create			friendly. In short, this bass really rocks.

Shallow-Type Subwoofers

Amplifiers &

TS-SW3001S4 TS-SW3001S2 TS-SW2501S4 TS-SW2501S2 TS-SW841D

With enhanced maximum power and handling shallow dimensions, TS-SW subwoofers are more versatile than ever. The Full (30 cm) and Regular (25 cm) sizes can be installed behind and under seats, and the Compact (20 cm) size can even be mounted on rear sidewalls and trays of smaller cars.

Full-size
30 cm	Full-size
(12")	pickup trucks etc.	Behind seats	Under seats
Regular		Rear sidewall	Rear tray
25 cm	Standard-size

TS-SW301 TS-SW251

The pressure of this air varies as the cones move back and forth, resulting in smoother, more precise linearity. The trapped air behaves like a spring, eliminating the need for a conventional spider structure, so the unit can be made shallow enough to fit in a tight space. Inside the enclosure, a drive cone deflects air pressure and a fin-shaped basket smoothly directs air sideways. This makes bass output remarkably stable, despite these units’ compact size. The system also enhances durability, as the subwoofers are subjected to smaller frequency changes (and less wear and tear) than conventional subwoofers.

TS-SW3001S4 Cross Section

Subwoofers

(10")	pickup trucks etc.
Compact

High Power 6-Layer Aluminum Wire Winding Voice Coil

Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone

Cone Ring

20 cm
(8")	SUV	Sedan	Compact vehicles

Design

3-Layer Fiber Woven

Radial Surround

(Drive Cone: M-Shape)

Air-Suspension Control System

Thanks to Pioneer’s unique Air-Suspension Control System, TS-SW subwoofers offer deep, rich bass in a shallow, compact form. Air is trapped within the composite IMPP™ double cone, between the main cone and the drive cone behind it.

Frequency Changes Before and After Reliability Test
35		Subwoofer with Air-Suspension
	33 Hz
		Control System
30	30 Hz
		28 Hz
25	Conventional subwoofers
	Before test	24 Hz
		After test
20

Air Suspension

Excursion

Control System

Interlaced Ultra Long

Glass Fiber IMPP Cone

Double Cone

Reinforced Nodes

Bottom-Hold Aluminum

Die-Cast Rigid Chassis

Component Enclosed Subwoofers

TS-WX301800 W Max.

30 cm Bass-Reflex Subwoofer

• Blue IMPP composite cone	• Maximum input: 800 W
• Bass-reflex design	• Nominal input: 150 W

•37 liters wooden enclosure

•4-layer, long voice coil

•Single nomex damper

•Extended excursion design

•Extended and vented pole yoke

•Best tuned parameters

TS-WX11A		150 W Max.*
13 cm × 21 cm Sealed Active Subwoofer
• Built-in MOSFET 150 W max.	• Built-in variable LPF (50 Hz to	*Output Power
monaural amplifier	125 Hz, –12 dB/oct.)
• 13 cm × 21 cm aluminum and IMPP	• Aluminum die-cast heatsink
composite cone woofer with	• Maximum output: 150 W
strontium magnet	• Nominal output: 50 W

•Wired remote control (input level, crossover frequency, phase)

•Speaker and RCA level inputs

TS-WX22A	150 W Max.*
20 cm Sealed Active Subwoofer
• Built-in MOSFET 150 W max. monaural amplifier	*Output Power
• 20 cm IMPP composite cone woofer with
strontium magnet
• Wired remote control (input level,
crossover frequency, phase)
• Speaker and RCA level inputs
• Built-in variable LPF
(50 Hz to 125 Hz, –12 dB/oct.)
• Aluminum die-cast heatsink
• Maximum output: 150 W
• Nominal output: 60 W

Can be installed at rear luggage room, under seat, etc. Rear terminals

TS-WX206A150 W Max.*

20 cm Bandpass Active Subwoofer

• Built-in MOSFET 150 W max. monaural amplifier

*Output Power

• 20 cm IMPP composite cone woofer with strontium magnet

• Large dual port bandpass design for rich and powerful bass

• Speaker and RCA level inputs

• Input level control/phase switch

• Built-in variable LPF

(50 Hz to 125 Hz, –12 dB/oct.)

• Aluminum die-cast heatsink

• Maximum output: 150 W

• Nominal output: 60 W

Sound quality adjustment knobs

Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer. 49