Ranger/Free Lite S and a Flashheads

Ranger/Free Lite S and A heads are designed specifically for the Ranger RX battery pack. The special flashhead bayonet plug with locking ring protects against dust and humidity. The modelling lamp can be activated for 15 or 30 seconds.

By pressing the switch (-on the rear of the head-) once, the modelling lamp switches off after 15 seconds, when pressing the switch twice within 2 seconds, the modelling lamp will switch off after 30 seconds.

To switch off the modelling lamp earlier, (after two seconds) just press the touch button again.

•The maximum modelling lamp power for the pack is 100W / 12V for one connected flashhead or two 50 W / 12 V for two connected flashheads.

•The standard Elinchrom reflector fitting with bayonet and breech lock accepts all Elinchrom/Prolinca accessories manufactured since 1974.

•The Ranger/Free Lite S is a universal flashhead for all general studio and location work.

•The Ranger/Free Lite A head comes with a special, short flash duration flashtube, for action freezing photography (One A head 1/2300 s two A heads 1/4310 s, t 0.5 at full power).

•Flashheads are fitted with 3.5 m heavy duty cable.

Modelling lamp switch

Modelling lamp

Art. Nr: 23044

Lamp fuse 5AF

Safety Precautions

• The Ranger/Free Lite flashheads cannot be insulated against humidity and dust.

• Only use them with suitable protection if wet or similary dangerous circumstances. ! • Do not use near flammable/explosive material (min. 1m distance of any object)

• Do not open the unit. In the event of damage or apparent failure, contact a repair service or any Elinca agent or email: elinca@elinca.ch

• For your safety, use only elinchrom flashhead.