Installation, Operation | Blue Sea Systems PN 9001e instruction

Marine Electrical Products

e-Series Selector Battery Switch

PN 9001e

Features

•Selects battery bank 1 or battery bank 2, or 1+2 for charging or emergency starting

•For switching battery banks in applications requiring high power output, reliability, and low heat generation

Tin-plated copper studs:

•3/8"-16 (M10) provide maximum conductivity and corrosion resistance

•One-piece to reduce risk of overheating

•7/8" (22.22mm) length to accept multiple cable terminals

Case design:

•Allows surface mounting or rear panel mounting

•Accepts up to 4/0 AWG (120 mm²) battery cables

Caution

Specifications

Cranking Rating: 10 sec.	2,000 Amperes DC
Cranking Rating: 1 min.	1,000 Amperes DC
Intermittent Rating: 5 min. (UL 1107)	600 Amperes DC
Continuous Rating: (UL 1107)	350 Amperes DC
Terminal Stud, Tin-Plated Copper	3/8"-16 (M10)
Torque	140 in-lb (15.82 N·m)
Cable Size to Meet Ratings*	4/0 AWG (120 mm²)
Maximum Voltage Rating	32 Volts DC
Ignition Protected
marked

Agency Specifications

•Meets all American Boat and Yacht Council (ABYC) requirements for battery switches

•UL Listed - UL 1107 for electric power switches

•Meets UL 1500 and SAE J1171 external ignition protection requirements

Guarantee

Any Blue Sea Systems product with which a customer is not satisfied may be returned for a refund or replacement at any time.

For information about Blue Sea Systems Engine Starting Standard, go to www.bluesea.com.

* Reducing cable sizes will reduce current ratings

Blue Sea Systems Inc.	Phone (360)	738-8230
425 Sequoia Drive	Fax (360)	734-4195
Bellingham, WA 98226 USA	E-mail conductor@bluesea.com
	www.bluesea.com

•Disconnect positive battery terminal before installing.

•Débranchez la cosse positive de la batterie avant de l’installer.

•Desconecte el terminal positivo de la batería antes de la instalación.

•Prima di eseguire l’installazione, disconnettere il terminale positivo della batteria.

•Consult marine electrical professional for proper wiring application.

•Consultez un professionnel de l’électricité marine pour installer le câblage correctement.

•Consulte a un electricista marino profesional para la aplicación de alambrado apropiada.

•Per assicurarsi che i cavi siano correttamente collegati, rivolgersi ad un elettricista specializzato in motori marini.

Installation

•Mount in an easily accessible location close to the batteries.

•Montez-le dans un endroit facilement accessible près des batteries.

•Monte en una ubicación fácilmente accesible cerca de la batería.

•Montare in un punto facilmente accessibile e vicino alle batterie.

•Attach one 4/0 AWG cable per terminal to meet ratings.

•Raccordez un câble 95mm² par cosse pour respecter les spécifications.

•Sujete un cable 95mm² por terminal de acuerdo a la clasificación.

•Attaccare un cavo 95mm² per conformarsi alle tarature.

•Refer to the latest edition of NFPA 302 and/or ABYC E11 Standard for installation information.

•Battery cable terminals must be attached under nut and lock washer. Torque 140 in-lb (15.82 N·m).

•Les cosses des câbles de batterie doivent être fixées sous la rondelle de sûreté et l’écrou – couple de serrage de 15,82 N·m (140 lb-po).

•Los terminales de los cables de batería deberán ser sujetados debajo de la tuerca y la arandela. Apriételos a una torsión de 15,82 N·m (140 lbs-pul).

•I terminali del cavo della batteria vanno attaccati con un dado e una rondella elastica: coppia di 15,82 N·m (140 lbs-in).

Operation

•Turn all appliances off before turning the battery switch to OFF.

•Éteignez tous les appareils électriques avant de mettre l’interrupteur de batterie sur ARRÊT.

•Apague todos los artefactos antes de girar el interruptor de batería a APAGADO (OFF).

•Spegnere tutte le apparecchiature prima di muovere l’interruttore della batteria su OFF (spento).

•Do not switch to OFF while engine is running.

•Ne le mettez pas sur ARRÊT alors que le moteur tourne.

•No coloque el interruptor en APAGADO (OFF) mientras que el motor esté funcionando.

•Non muovere l’interruttore su OFF (spento) quando il motore è in moto.

PN 9001e specifications

The Blue Sea Systems PN 9001e is a highly regarded marine electrical panel designed specifically for the unique requirements of boaters and marine enthusiasts. Known for its exceptional durability and functionality, the PN 9001e combines innovative technology with user-friendly features, making it an essential component in modern marine electrical systems.

One of the standout features of the PN 9001e is its robust construction. The panel is built with high-quality materials that are resistant to corrosion, ensuring it can withstand the harsh marine environment. The panel's enclosure is designed to meet stringent IP standards, providing protection from dust and water ingress. This durability makes it suitable for both freshwater and saltwater applications.

The PN 9001e boasts a user-friendly interface with clearly labeled switches and indicators. The well-organized layout allows for easy access to critical functions, enabling users to monitor and control electrical systems without confusion. This ergonomic design not only enhances usability but also improves safety on board by reducing the risk of accidental operation.

Advanced technologies incorporated into the PN 9001e further enhance its performance. It features state-of-the-art circuit protection mechanisms that safeguard against overloads and short circuits. This integrated protection not only prolongs the lifespan of electrical components but also ensures the safety of all onboard equipment and passengers.

Additionally, the PN 9001e supports customizable configurations and is compatible with a wide range of devices and systems. Users can integrate various components, from lighting to pumps, with ease, allowing for a tailored electrical setup that meets individual boating needs. The panel is also compatible with popular power distribution technologies, offering seamless integration with existing systems.

Another notable characteristic of the PN 9001e is its lightweight design, which is particularly advantageous for boaters looking to maintain optimal weight distribution and performance. Despite its compact form factor, it does not compromise on features or functionality, making it an efficient choice for small to mid-sized vessels.

In summary, the Blue Sea Systems PN 9001e is an exemplary marine electrical panel that epitomizes quality and innovation in marine technology. Its durable construction, user-friendly interface, advanced protection features, and customizable functionality make it a top choice for boaters seeking reliability and efficiency in their electrical systems. With the PN 9001e, boaters can enjoy peace of mind knowing they have a dependable electrical panel to power their adventures on the water.